Can I get All-on-4 on the top jaw only and leave the bottom alone?
Yes. Many people have a full arch on the top jaw only and keep their own lower teeth, as long as those teeth are healthy enough to bite against it for years. In Vietnam one top jaw costs about A$9,141 to A$14,854 with 4 implants, or about A$10,855 to A$19,653 with 6, by implant brand. The bite is planned for both jaws together, even when only one is treated. In studies, a zirconia top arch biting on natural lower teeth had no more problems than one biting on another zirconia arch (Gonzalez 2017), and grinding without a night guard was the bigger risk (Chochlidakis 2020).
One jaw only, at a glance
| Top jaw only | |
|---|---|
| Is it done? | Yes, often, when the lower teeth are healthy enough |
| Top jaw, 4 implants (All-on-4) | A$9,141 to A$14,854 in Vietnam, by brand |
| Top jaw, 6 implants (All-on-6) | A$10,855 to A$19,653 in Vietnam, by brand |
| What the lower teeth need | No active gum disease or decay, and enough back teeth to share the bite |
| Bite planning | Both jaws together, from scans of both |
| Main long-term risk | Chipping and wear, mostly linked to grinding without a night guard (Chochlidakis 2020) |
| Trips to Vietnam | Two, of about a week each, the same as for both jaws |
| Adding the lower jaw later | Possible, as a separate treatment with its own two trips |
| In Australia, per arch | A$23,000 to A$45,000 (ArtSmiles, a Queensland clinic, 2026) |
Vietnam prices are from The Hudson price list for our partner clinics, November 2026. Each row is explained below.
Why the top jaw is often done first, or alone
Top teeth and bottom teeth often fail at different speeds. Gum disease, decay or old crowns can take most of the top teeth while the lower teeth are still sound. A loose top denture is also the one many people want gone, because it covers the roof of the mouth and changes taste and speech.
So a common plan is a full arch on top, and the work the lower teeth need to stay healthy: a clean, fillings, perhaps a crown or a single implant. Every tooth you keep is one you do not pay to replace. The question is not whether one jaw can be done. It is whether your lower teeth are strong enough to stand up to a fixed arch for years.
What does one jaw cost in Vietnam?
The price below is the price list's All-on-4 or All-on-6 price for one jaw, by implant brand. It includes the implants, the titanium bar, a free temporary acrylic arch, and the final arch of 12 to 14 zirconia teeth. For the top jaw, the surgeons at our partner clinics often plan 6 implants, because upper bone is usually softer.
| Level | Implant brand | Top jaw, All-on-4 | Top jaw, All-on-6 |
|---|---|---|---|
| Standard | Osstem (Korea) | A$9,141 | A$10,855 |
| Standard | Neobiotech (Korea) | A$10,000 | A$12,200 |
| Plus | Hiossen (USA) | A$10,283 | A$12,400 |
| Plus | Kontact (France) | A$11,083 | A$13,426 |
| Premium | Neodent (Brazil, Straumann Group) | A$14,402 | A$18,833 |
| Premium | Straumann SLActive (Switzerland) | A$14,854 | A$19,653 |
Then add what the lower teeth need, tooth by tooth. A crown costs A$222 to A$971 per tooth at our partner clinics, depending on the material, and a single implant with its crown A$786 to A$3,102, depending on the brand. Many people need only a clean and a few fillings. Your written plan lists each lower tooth and its price.
For comparison, both jaws at once (lower All-on-4 plus upper All-on-6) cost about A$19,996 to A$34,507: the All-on-4 price for one jaw added to the All-on-6 price for the other, same brand. So keeping a healthy lower jaw saves the whole price of the lower arch. In Australia, ArtSmiles, a Queensland clinic, says most providers charge A$23,000 to A$45,000 per arch (2026).
You do not pay The Hudson anything. The clinic you choose pays us a referral fee for each patient, and you pay the clinic's normal price, the same as if you walked in yourself.
When is leaving the lower jaw alone a good plan?
Leaving the lower jaw alone works when the lower teeth can do their share of the chewing for years. The dentist checks this on the 3D scan, X-rays and an examination of the gums. These are the usual signs:
- No active gum disease. Pockets around the teeth are shallow, and the teeth are not loose.
- Decay and old fillings are treated, or can be treated on the same trip.
- Enough back teeth on both sides to share the bite, natural, crowned or on implants. Biting only on the front teeth overloads them.
- The lower teeth sit at an even height. Teeth that have drifted or grown down into gaps may need a crown or reshaping, so the new top arch can meet them evenly.
- Bone around the lower teeth is stable on the X-ray.
If some lower teeth are doubtful, a common plan is to treat the strong ones and replace the weak ones with single implants or a small bridge, rather than taking them all out. Whether a doubtful tooth is worth keeping is a decision for the treating dentist, tooth by tooth.
Biting a fixed top arch against natural teeth: what the studies show
A fixed full arch does not move or cushion the bite the way teeth in their sockets do, so what it bites against matters. Several studies looked at the opposing jaw as a risk factor.
| Study | What it compared | What it found |
|---|---|---|
| Gonzalez 2017, 40 patients, mean 33 months | Zirconia top arches against a lower zirconia arch, natural lower teeth, or a lower acrylic arch | Against natural teeth and against zirconia, the same rate of problems; the lower acrylic arches had 16 broken teeth |
| Chochlidakis 2020, 48 arches, up to 5 years | Many factors, including the opposing jaw and night guard use | The opposing jaw affected the total number of problems; no night guard was linked to chipping and frame breaks |
| Papaspyridakos 2013, 16 zirconia arches | Causes of porcelain chipping | Every chip was linked to grinding, an opposing fixed arch, and no night guard |
| Papaspyridakos 2019, 19 people with fixed arches in both jaws | Two fixed arches against each other | Wear of the teeth was the most common problem, with a 5-year rate of 49.0% |
Put together, the studies point the same way. A fixed arch biting against natural teeth is not a weak plan in itself. The repeat finding is that grinding and going without a night guard lead to chips, and that two fixed arches against each other wear and chip more than people expect. These are small studies from single centres, so treat them as a guide, not a rule.
The material on the top arch matters too. Zirconia teeth on a titanium bar wore less than acrylic teeth in pooled studies (Marinkovic 2026), and in the Gonzalez study the acrylic teeth were the weakest link. The final arch in our All-on-4 price is zirconia.
Will a zirconia top arch wear down my lower teeth?
This is the worry people raise most about one jaw only. The evidence is reassuring when the zirconia is well polished. In a randomised clinical study, enamel opposite polished solid zirconia crowns wore about as much as enamel opposite metal-ceramic crowns, and as much as natural teeth against each other, after one year (Esquivel-Upshaw 2018).
A review of 5 clinical studies found enamel wear against zirconia similar to, or more than, natural teeth against each other, but less than against metal-ceramic crowns (Gou 2019). The results varied widely and the studies were short, so the honest answer is that wear is low when the surface is smooth, and less certain over decades.
- Ask for the biting surfaces of the arch to be polished smooth, and re-polished after any adjustment in the chair.
- Wear a night guard if you grind or clench. It protects both the arch and your lower teeth.
- Have the bite checked once a year, so small high spots are caught early.
What if the lower jaw has a partial denture or only a few teeth?
A fixed top arch against a loose lower partial denture is a harder match. The lower denture moves under a firm bite, the few remaining lower teeth take the load, and the bite becomes uneven. Dentists have long described a pattern of bone loss when a full denture bites against a few natural front teeth, called combination syndrome. A literature review found the documented evidence for it is limited (Palmqvist 2003), but the principle behind it holds: the bite should be shared evenly.
So if your lower jaw has few teeth, the dentist may suggest a plan for it at the same time: single implants or a small implant bridge at the back, a lower snap-on denture on 2 implants, or a lower full arch. That plan does not have to be done now, but it should be written down now, so the top arch is built to fit it later.
What happens to the lower jaw later?
Natural teeth keep changing. They can wear, drift, decay or get gum disease, while the implant arch above them stays where it was put. So the lower jaw needs the same care as any natural teeth: brushing, cleaning between the teeth, and regular checks and cleans with a dentist in Australia, as often as your dentist advises.
- If a lower tooth is lost, it can be replaced with a single implant or a bridge. The top arch may need a small adjustment so the bite stays even.
- If many lower teeth fail later, a lower full arch can be added as its own treatment, with its own two trips. The top arch stays.
- The bite records and scans from your top-jaw treatment make a later lower-jaw plan simpler, so keep them.
Which plan suits my situation?
| Your situation | Usual plan | Why |
|---|---|---|
| Top teeth failing, lower teeth healthy | Top full arch only; a clean and checks for the lower teeth | The lower teeth can share the bite; nothing healthy is removed |
| Top teeth failing, one or two weak lower teeth | Top full arch, plus a crown or single implant below | Fixes the weak spot so the bite is even |
| Top teeth failing, lower gum disease active | Gum treatment first, then decide | Disease left untreated puts the lower teeth and the bite at risk |
| Lower jaw with a loose partial denture | Top full arch, and a written plan for the lower jaw | A moving lower denture makes the bite uneven |
| You grind or clench | Top zirconia arch, plus a night guard | Grinding without a night guard was linked to chipping (Chochlidakis 2020) |
| Soft upper bone | Top All-on-6 rather than All-on-4 | Two extra implants can spread the load; your surgeon decides after the scan |
| Both jaws failing | Both jaws on the same two trips | One healing time, and the bite planned for both together |
What one jaw means for the trip from Australia
The top jaw alone takes the same two trips as both jaws: about a week each, 3 to 6 months apart, while the implants join the bone. The lower teeth fit around that timetable.
- Trip 1: a 3D scan of both jaws, then the plan for the top arch and every lower tooth, in writing. The top implants go in and a temporary arch is fitted. Fillings and a clean for the lower teeth can often be done on the same trip.
- At home: soft food, careful cleaning, and photos to us. Your temporary top arch bites on your own lower teeth, so avoid hard food on both.
- Trip 2: the final zirconia arch, with the bite checked against your lower teeth. Lower crowns, if you need them, are often done now, so the final bite is set for both jaws together.
Lower crowns take a few days of their own, which fit inside the second trip in most plans. Ask for the full day-by-day plan before you book the flights.
Common beliefs that are not quite right
| What people hear | What is true |
|---|---|
| If the top teeth go, the bottom teeth must go too. | Not if the lower teeth are healthy; a top arch against natural teeth is a common plan. |
| A fixed arch against natural teeth will always break. | Problems were no more common than against a zirconia arch in one study (Gonzalez 2017); grinding without a night guard is the bigger risk. |
| Zirconia always wears down the teeth it bites on. | Polished zirconia caused enamel wear similar to metal-ceramic and natural teeth after one year (Esquivel-Upshaw 2018). |
| Doing one jaw costs half as much as two. | One jaw saves the whole lower arch price, but the lower teeth may need their own work, priced tooth by tooth. |
| The lower jaw can be ignored once the top is done. | Natural teeth still need cleaning and checks, and the bite is checked every year. |
| Adding the lower jaw later means redoing the top. | The top arch normally stays; it may need a small bite adjustment. |
Questions to ask before you treat only the top jaw
- Are my lower teeth healthy enough to bite against a fixed arch for years?
- Which lower teeth need work, and what does each cost?
- Do I have enough back teeth below to share the bite evenly?
- Will my top jaw have 4 implants or 6, and why?
- What will the final top arch be made of, and will the biting surfaces be polished?
- Do I need a night guard?
- If my lower teeth fail later, what would the plan for the lower jaw be?
- Which records and scans will I take home?
Quick answers
Does doing only the top jaw cost less?
Yes. One top jaw costs about A$9,141 to A$14,854 with 4 implants in Vietnam, by brand, against about A$19,996 to A$34,507 for both jaws. Your lower teeth may need their own work, priced tooth by tooth.
Can I add the bottom jaw later?
Yes. A lower full arch can be done later as its own treatment, with its own two trips. Keep the scans and bite records from the top jaw, which make the later plan simpler.
Will my bottom teeth wear down against a zirconia arch?
Polished zirconia caused enamel wear similar to metal-ceramic crowns and natural teeth after one year in a randomised study (Esquivel-Upshaw 2018). Ask for the biting surfaces to be polished, and wear a night guard if you grind.
Do I need a night guard with one full arch?
If you grind or clench, yes. In studies of fixed full arches, grinding and no night guard were linked to chipped teeth (Chochlidakis 2020; Papaspyridakos 2013).
Send your 3D scan or your Australian quote
Find out whether your lower teeth can stay, and what one jaw costs, before you book a flight.
Talk to usSources
- Gonzalez J, Triplett RG. Complications and clinical considerations of the implant-retained zirconia complete-arch prosthesis with various opposing dentitions. Int J Oral Maxillofac Implants, 2017.
- Chochlidakis K et al. Survival rates and prosthetic complications of implant fixed complete dental prostheses: an up to 5-year retrospective study. J Prosthet Dent, 2020.
- Papaspyridakos P, Lal K. Computer-assisted design/computer-assisted manufacturing zirconia implant fixed complete prostheses: clinical results and technical complications up to 4 years of function. Clin Oral Implants Res, 2013.
- Papaspyridakos P et al. Double full-arch fixed implant-supported prostheses: outcomes and complications after a mean follow-up of 5 years. J Prosthodont, 2019.
- Esquivel-Upshaw JF et al. Randomized clinical study of wear of enamel antagonists against polished monolithic zirconia crowns. J Dent, 2018.
- Gou M et al. Antagonist enamel wear of tooth-supported monolithic zirconia posterior crowns in vivo: a systematic review. J Prosthet Dent, 2019.
- Palmqvist S, Carlsson GE, Owall B. The combination syndrome: a literature review. J Prosthet Dent, 2003.
- Marinkovic D et al. Prosthetic and biological complications of metal-zirconia versus metal-acrylic implant-supported complete-arch prostheses: systematic review and meta-analysis. J Clin Exp Dent, 2026.
- Australian All-on-4 prices: ArtSmiles Cosmetic Dentistry, Southport QLD, one clinic's own published price tiers (updated 8 July 2026).
- Vietnam prices: The Hudson price list, November 2026.