Zirconia vs E-max crowns: which is better?
Zirconia is the stronger material. E-max lets more light through, so it can look a little more like enamel. Both last very well: in the largest review so far (64 studies), 98.5% of solid E-max crowns and 96.8% of solid zirconia crowns were still in place after 5 years, a gap too small to be sure of. For back teeth and for people who grind, zirconia is the usual choice. For front teeth either can look natural; the shade, shape and lab finish decide the look more than the material.
Zirconia and E-max at a glance
| Zirconia (solid) | E-max (solid) | |
|---|---|---|
| What it is | Oxide ceramic | Glass ceramic (lithium disilicate) |
| Strength | 400 to 1,500 MPa, by type | 420 to 500 MPa |
| Light passing through | Low to medium, by type | High |
| Still in place after 5 years | 96.8% | 98.5% |
| Chipped within 5 years | 0.4% | 1.7% |
| Came loose within 5 years | 3.0% | 0.7% |
| Thinnest crown | 0.4 to 1.0 mm, by type | 1 mm, bonded only |
| How it is fixed | Cement or bonding | Usually bonded |
| Usually chosen for | Molars, grinders, short teeth, bridges | Front teeth, premolars |
Survival and problem rates are from the Pjetursson 2026 review; strength from Zhang and Lawn 2018; thickness from the makers' guides. Each row is explained below.
What is the difference between zirconia and E-max?
A crown is a cap that covers the whole visible part of a tooth. Zirconia and E-max are the two materials most dentists use for tooth-coloured crowns today. Both are ceramics, both are metal-free, and both are made by a dental lab from a digital scan or a mould of your tooth.
- Zirconia (zirconium oxide) is an oxide ceramic. The lab mills the crown from a block, then bakes it hard. It is the strongest tooth-coloured material in use.
- E-max (lithium disilicate, made by Ivoclar) is a glass ceramic. The lab mills or presses it, then fires it. Because it contains glass, light passes into it much like it passes into enamel.
Both can be made as one solid piece, called "monolithic", or as a core with a layer of porcelain baked on top, called "layered" or "veneered". Most crowns today are solid, and that matters more than most people think: over 5 years, layered zirconia crowns chipped in 7.9% of cases and solid zirconia crowns in 0.4% (Pjetursson 2026).
How strong is each one?
Strength is measured as flexural strength in megapascals (MPa): how hard a bar of the material can be bent before it breaks. The ranges below come from a review of zirconia materials by Zhang and Lawn (2018).
| Material | Strength (MPa) | How much light passes through |
|---|---|---|
| Classic zirconia (3Y) | 900 to 1,500 | Least |
| Translucent zirconia (4Y) | 600 to 1,000 | More |
| Most translucent zirconia (5Y) | 400 to 900 | Most of the zirconias |
| E-max (lithium disilicate) | 420 to 500 | Most |
"Zirconia" is not one material. The more light a zirconia lets through, the weaker it gets: the most translucent type can be less than half as strong as the classic one. Many labs now use multilayer blocks that are stronger near the gum and more translucent at the biting edge, so one crown gets some of both.
Two cautions. Brochure figures come from different tests, and outside labs often measure lower numbers than the maker prints, so use them to compare types, not brands. And every ceramic slowly loses strength under years of chewing, by two to three times over a lifetime, while biting on a back tooth can pass 500 newtons (Zhang and Lawn 2018). That is why the strongest material usually goes where the bite is heaviest.
How long do zirconia and E-max crowns last?
The strongest evidence is a 2026 systematic review by Pjetursson and colleagues in the International Journal of Prosthodontics. It pooled 64 studies with more than 11,500 crowns on natural teeth, all followed forward in time for at least 3 years on average.
| Crown type | Crowns studied | Still in place after 5 years |
|---|---|---|
| Solid E-max (lithium disilicate) | 1,106 | 98.5% |
| Solid zirconia | 737 | 96.8% |
| Layered zirconia | 877 | 97.3% |
| Metal-ceramic (porcelain on metal) | 3,509 | 97.1% |
- The gap between solid E-max and solid zirconia was not statistically significant. Solid E-max had the highest survival, and the authors now use it as the standard that new crown materials are measured against.
- The zirconia studies are younger: their average follow-up was only 3.5 years, against 4.6 years for E-max.
- Zirconia has improved a lot. In an earlier 2015 review, mostly of older layered designs, only 92.1% of zirconia crowns survived 5 years (Sailer 2015).
- Ten years: in one private practice, 96.5% of solid pressed E-max crowns were still in place after about 10 years, and 5 of the 7 failures were on molars (Malament 2019). No large 10-year study of solid zirconia crowns exists yet.
What goes wrong with each one?
The same review counted every problem, not only crowns that were lost. Share of crowns with each problem within 5 years:
| Problem | Solid E-max | Solid zirconia | Layered zirconia |
|---|---|---|---|
| Chip or crack in the ceramic | 1.7% | 0.4% | 7.9% |
| Crown broke through and was replaced | 0.7% | 0% | 0.8% |
| Crown came loose | 0.7% | 3.0% | 0.8% |
| Decay at the edge of the crown | 0.9% | 1.1% | 0.4% |
- E-max chips a little more often. A small chip is usually polished smooth; a larger one can be repaired with a bonded filling material.
- Solid zirconia comes loose a little more often. If the crown and the tooth are sound, it can usually be cleaned and cemented back on.
- Decay at the edge is rare with both. It depends mostly on cleaning between the teeth and regular check-ups, not on the material.
- Not one crown of either kind was remade because of its look in these studies. When a crown looks wrong, the cause is the shade, shape or finish chosen, not the material.
How much of my tooth is removed?
A crown needs room. The thinner a crown can be made, the less of your tooth has to be cut away to fit it. Minimum thickness from the makers' guides:
- Classic strong zirconia: 0.4 mm on a front tooth and 0.5 mm on a back tooth.
- Translucent zirconia: about 0.8 mm on a front tooth and 1.0 mm on a back tooth.
- E-max: 1 mm, but only when it is bonded to the tooth. The classic E-max preparation takes 1.5 to 2 mm off the biting surface.
This is one reason zirconia is often chosen for a back tooth that is short, or where the teeth meet tightly: it fits in less space. On a front tooth the difference is smaller, and the choice usually comes down to how much light the crown needs to let through to match the teeth beside it.
How is each crown fixed to the tooth?
- E-max is usually bonded. The inside of the crown is etched, primed and glued with a resin cement. A thin 1 mm E-max crown must be bonded; a thicker one can also be fixed with a self-adhesive or a conventional cement.
- Zirconia can be fixed with a conventional cement, a self-adhesive cement or bonded. It cannot be etched like glass, so bonding it needs the inside sandblasted and a special primer.
On a short or very tapered tooth, the grip matters most. Ivoclar's preparation guide asks for at least 4 mm of tooth height and walls that slope no more than 4 to 8 degrees when a crown is held only by conventional cement. If your tooth is short, ask the dentist how the crown will be held: bonded, or with the tooth built up first.
Which should I choose for front teeth and back teeth?
| Your situation | Usual choice | Why |
|---|---|---|
| Molar (back tooth) | Zirconia | Heaviest bite; most of E-max's few failures were on molars |
| Premolar | Either | Shows in a wide smile and still chews; translucent or multilayer zirconia, or E-max |
| One front tooth next to your own teeth | E-max or translucent zirconia | It has to copy how light passes through the tooth beside it |
| Several front teeth | E-max or translucent zirconia | Looks matter most; the lab's shade and shape work decide the result |
| You grind or clench | Zirconia, plus a night guard | Ivoclar lists heavy grinding as a reason not to use E-max |
| Short tooth or a tight bite | Zirconia | It can be made thinner, so less tooth is removed |
| Dark or stained tooth, or a metal post | More opaque zirconia, or E-max in a lower translucency | Hides the dark colour underneath |
| Bridge on back teeth | Zirconia | E-max bridges stop at three teeth and at the premolars |
| You want to whiten your teeth | Whiten first, then either | A crown keeps the colour it was made in |
On grinding, the evidence is thin: no study yet compares the two materials in people who grind. In studies on implant teeth, restorations in grinders failed more often, which is why a night guard is the usual advice (Zhou 2016).
Does zirconia wear down the opposite tooth?
This is an old worry from the time of rough, unpolished zirconia. In a 2024 review of clinical trials of back-tooth crowns followed for up to 2 years, the opposite natural tooth lost about 0.04 mm more enamel against solid zirconia than against a natural tooth. Against E-max the loss was close to natural. Against metal-ceramic it was about 0.08 mm more, the most of the three (Mao 2024).
Other reviews find polished zirconia as gentle as enamel over time. What everyone agrees on is the finish: a crown polished smooth wears the opposite tooth less than a rough one. When the dentist adjusts your bite on fitting day, the ground spot should be polished again before you leave.
Common beliefs that are not quite right
- "Zirconia is stronger, so it lasts longer." Not in the studies. At 5 years, solid E-max did at least as well as solid zirconia.
- "All zirconia is the same." The most translucent types can be less than half as strong as classic zirconia.
- "A layered crown is just as safe." Layered zirconia chipped in 7.9% of cases over 5 years, solid zirconia in 0.4%.
- "E-max can never go on a back tooth." It is used there with good 10-year results, but most of its failures are on molars, so zirconia is the safer choice for a heavy bite.
- "I can whiten my crowns later." Whitening does not change the colour of a crown (Australian Dental Association, via Colgate). Whiten your own teeth first, then match the crown to them.
- "A dearer crown will look more natural." The shade, the shape and the lab's finish decide the look.
How many days do crowns take in Vietnam?
Zirconia crowns need one trip of up to 7 days. Both materials are made by a lab after your teeth are prepared, so the timing is the same.
- Day 1: check-up and 3D scan. The dentist explains your plan and prices, and you decide. If you go ahead, your teeth are prepared and you get temporary crowns.
- Days 2 to 5: the lab makes your crowns. You are free to explore, with soft, easy food.
- Days 6 to 7: your crowns are fitted, your bite is checked and adjusted, and you get your records and the lab warranty papers.
If a tooth needs a root canal first, plan extra days. Someone from our team comes to every appointment with you.
What to ask before your crowns are made
- Which material and which type: classic, translucent or multilayer zirconia, or E-max?
- Solid or layered? Solid chips far less.
- How will each crown be fixed: cement or bonding? This matters most on short teeth.
- Can I see the shade in daylight, next to my own teeth, before the crowns are fixed?
- Will the crowns be polished again after my bite is adjusted?
- Which lab warranty comes with this brand, and will I get the warranty card?
Do clinics in Vietnam offer E-max crowns?
Our partner clinics in Vietnam use zirconia for crowns and E-max (Emax Press) for veneers. We have not found an E-max crown option at the clinics we work with, so if E-max crowns are important to you, tell us and we will ask more clinics.
How much do zirconia crowns cost in Vietnam?
Zirconia crowns in Vietnam cost A$222 to A$971 per tooth at our partner clinics, depending on the brand. The brands differ in where they are made, their shade range and the length of the lab warranty, not in how natural the crown can look.
| Material | Made in | Lab warranty | Price per tooth |
|---|---|---|---|
| Katana | Japan | 7 years | A$222 |
| Ceramill | Austria | 10 years | A$286 |
| DD Bio | Germany | 10 years | A$333 |
| Origin Beyond Plus | USA | 10 years | A$357 |
| Lava Plus | USA | 15 years | A$444 |
| Lava Esthetic | USA | 15 years | A$554 |
| Orodent Bleach | Italy | 19 years | A$666 |
| Origin Apex | USA | 15 years | A$971 |
In Australia, a crown (ADA item 615, a layered crown) cost A$1,678 on average at a general dentist in 2022, and A$1,250 to A$2,100 across most practices (ADA Dental Fees Survey 2022, via Choice).
What we see in Vietnam
DD Bio is a good place to start: it is strong, it looks good, and it has a 10-year lab warranty at a low price. Katana costs the least. For a front tooth, ask about Lava Esthetic, which lets more light through.
Quick answers
Which is stronger, zirconia or E-max?
Zirconia. Classic zirconia is two to three times as strong as E-max; the most translucent zirconias are closer to E-max.
Which lasts longer?
About the same. After 5 years, 98.5% of solid E-max and 96.8% of solid zirconia crowns were still in place, a difference too small to be sure of.
What are the disadvantages of zirconia crowns?
Classic zirconia lets little light through, so on a single front tooth it can look flat; a translucent type solves most of this. Solid zirconia also came loose a little more often than E-max (3.0% against 0.7% in 5 years).
What are the disadvantages of E-max crowns?
It is less strong, it chips a little more often, it usually needs more tooth removed unless it is bonded, and it is not advised for people who grind.
Which is more expensive, zirconia or E-max?
It depends on the brand. In Vietnam, zirconia crowns at our partner clinics cost A$222 to A$971 per tooth; E-max is offered there for veneers at about A$328 per tooth.
Not sure which material fits your teeth?
Send us a photo of your smile and tell us what matters most to you: strength, looks or budget. We will suggest the right material. Free.
Ask about my teethSources
- Pjetursson BE et al. Survival, failure and complication rates of metal-ceramic, veneered and monolithic all-ceramic tooth-supported single crowns, part 1. Int J Prosthodont, 2026.
- Sailer I et al. Dent Mater, 2015;31(6):603-623 (systematic review of all-ceramic and metal-ceramic single crowns).
- Malament KA et al. J Prosthet Dent, 2019;121(5):782-790 (10-year results of pressed lithium disilicate restorations).
- Zhang Y, Lawn BR. Novel zirconia materials in dentistry. J Dent Res, 2018.
- Mao Z et al. J Dent, 2024;142:104832 (network meta-analysis of opposing-tooth wear by crown material).
- Zhou Y et al. Clin Implant Dent Relat Res, 2016;18(2):410-420 (systematic review of bruxism and implant outcomes).
- Ivoclar. IPS e.max CAD: product information and indications.
- Ivoclar. IPS e.max information for dentists (preparation and cementation), 2015.
- Colgate Australia. Can you whiten a crown? (citing the Australian Dental Association).
- Choice. Dental fees: ADA Dental Fees Survey 2022.