Dental FAQs

Is Hiossen the same as Osstem, and what do the studies show?

Hiossen is Osstem's own company in the United States, set up by Osstem in 2006. It sells the same family of implant designs under its own names: the Hiossen ET III is the US twin of the Osstem TS III, and researchers at Seoul National University list them as one system ("Osstem TS [Hiossen ET]", Hlaing 2026). What differs is the factory and the paperwork: Hiossen says all its implants are made and packaged in Pennsylvania, and the US FDA cleared them under Hiossen's own name. Studies of Hiossen itself are short. In two randomised trials no Hiossen implant was lost in the first year (Tallarico 2021; Kim 2021), but we found no Hiossen study of 5 years or longer. Osstem's TS III, the same design made in Korea, has a 5-year study of 2,474 implants with 98.3% still in place (Lim 2025). We found no published maker warranty for Hiossen, so our price list shows the 15 years the clinic prints. A full Hiossen tooth at our partner clinics in Vietnam is A$1,214. Your dentist picks the brand for your bone after the 3D scan.

  • Hiossen: Osstem's US company since 2006; the company says every Hiossen implant is made and packaged in Pennsylvania.
  • Longest Hiossen trials found: 1 year. No implant lost in 58 implants (Tallarico 2021) or in 17 Hiossen implants against 14 Osstem ones (Kim 2021).
  • Full Hiossen tooth at our partner clinics in Vietnam: A$1,214; All-on-4 with Hiossen: A$10,283 per jaw.

Hiossen at a glance

QuestionAnswer
Who owns itOsstem Implant of South Korea, which set Hiossen up in 2006
Where it is madePennsylvania, USA, according to Hiossen; head office in Fairless Hills, Pennsylvania, with an office in New Jersey
Main implant lineET III, a tapered titanium implant, sold with an SA surface or the newer NH surface
Same design asOsstem TS III, which researchers list as one system with Hiossen ET (Hlaing 2026)
US approvalCleared by the FDA under Hiossen's name, for example the ET III Bio-SA system in 2016 (K151626)
Longest study of Hiossen itself1 year, with no implants lost (Tallarico 2021; Kim 2021)
Australian registerAn ARTG entry names Hiossen Inc as maker, with Osstem Australia as the sponsor
Warranty on our price list15 years, the years the clinic prints; no maker warranty found
Level on our price listPlus
Full tooth in VietnamA$1,214

An implant is a small titanium screw that sits in the jawbone in place of a tooth root. A connector (the abutment) screws into it, and the crown sits on the connector. All three together make one implant tooth. Prices from our partner clinics' list, updated Nov 2026.

Is Hiossen the same as Osstem?

Same owner, same design family, a separate factory. Hiossen's own page says it was established by its parent company Osstem in 2006 in Pennsylvania, and that all Hiossen implants are made and packaged in Pennsylvania. Osstem's implants for Asia, Australia and most of the world come from its factories in Korea and China.

HiossenOsstem
OwnerOsstem ImplantOsstem Implant
Main lineET IIITS III
Where madePennsylvania, USA (company statement)Busan, Korea, and a plant in China
SurfacesSA, and NH (SA with a thin apatite coat)SA, and other surfaces such as a hydroxyapatite coat
Main marketNorth AmericaKorea, Asia, Australia and others
Studies of 5 years or moreNone foundYes, up to 7 years (Kim 2014) and a 5-year study of 2,474 implants (Lim 2025)
Full tooth at our partner clinicsA$1,214A$786
  • The designs match. In a 2026 study of implant X-rays, Seoul National University researchers grouped the implants as "Osstem TS [Hiossen ET]", "Osstem [Hiossen] US" and "Osstem [Hiossen] SS": one system each, sold under two names (Hlaing 2026).
  • Parts makers treat them as one. Companies that make compatible parts list the Osstem TS III and Hiossen ET III codes side by side for the same implant sizes.
  • We found no official Hiossen or Osstem statement that every ET III and TS III part swaps one for one. Hiossen's own brochure lists two connection sizes, a mini one for its 3.2 mm implant and a regular one for the others, so the exact size still matters when a dentist orders a part.
  • The surfaces are named differently. Hiossen's NH surface is its own: a sandblasted and acid-etched base with a very thin calcium phosphate coat on top.

So if a dentist knows Osstem, they know the Hiossen design. The difference that matters for you is the record: Osstem has the longer and larger studies, and almost none of them name Hiossen.

What Hiossen states about its implants

From Hiossen's own brochure for the ET III system (read November 2026). These are the maker's claims, not results from studies by other groups.

  • Design: a bone-level implant with an 11 degree Morse taper connection (a tight cone fit between implant and connector) and an internal hex, a tapered body and a corkscrew thread, which the maker says gives strong grip when the implant goes in.
  • SA surface: the titanium is sandblasted with alumina and then acid-etched, to roughen it so bone can grow onto it. This is the same type of surface Osstem uses on the TS III SA.
  • NH surface: the SA surface plus a bioresorbable apatite coating that the maker says is about 10 nanometres thick and is absorbed as the bone heals, leaving bone on the SA surface.
  • The maker claims the NH surface raises bone-to-implant contact by 39% compared with SA, and platelet adhesion by 12%. These figures come from the maker's own testing.
  • The maker cites its own 2018 study of the NH implant, with average stability readings above 75 from the day of placement and no implant lost or complication in four weeks.
  • Sizes: a regular platform for most widths, a narrow 3.2 mm implant for thin ridges, and an ultra-wide implant for back teeth after an extraction or to replace a failed implant. The maker recommends at least 4.5 mm width at the back of the mouth.
  • Approval: the US FDA cleared Hiossen's ET III Bio-SA fixture system on 21 July 2016 (510(k) K151626) as an endosseous root-form implant. FDA clearance means the device was found equivalent to devices already on the market; it is not a long-term study.

What do studies by other groups show?

A search of PubMed in November 2026 found 12 records that mention Hiossen. Most are lab tests, case reports or animal studies. These are the clinical studies in people:

StudyWhat was testedWhat it foundLimits
Tallarico 2021, four Italian universitiesET III with NH surface against ET III with SA surface, 58 implants in 29 patients, one side of the mouth eachNo implant or tooth lost and no complications at 1 year after the teeth went on; the NH implants had higher stability readings at week 21 year; small
Tallarico 2019, same groupThe first 28 implants in 14 patients of that trialNo failures at 4 months; NH implants did not show the usual dip in stability at weeks 2 to 4Early results only
Kim 2021, Seoul National University Bundang HospitalHiossen NH (17 implants) against Osstem SA (14 implants) in the upper back jaw, loaded after 3 monthsEvery implant met the success criteria after about a year; stability was the same in both groupsSmall; about 1 year
Arllati 2026, KosovoTwo Hiossen implants placed straight after extraction in the front teeth, with a tooth fixed the same dayStable bone and gum 6 months after the final crownsOne patient
  • Two small randomised trials, both up to about a year, lost no Hiossen implants. That is a good start, but most implant losses that matter to a patient are counted over 5 to 10 years.
  • We found no study of Hiossen implants followed for 5 years or more. This does not mean they do worse later; it means nobody has published that record yet.
  • In a dog study, the NH surface held bone better than Straumann's SLActive surface at 4 and 6 weeks (Nevins 2024). Animal results do not tell you how an implant lasts in a person, so read it as early-stage evidence.
  • Lab drilling tests used Hiossen drills to study bone heating (Kosior 2021; Kosior 2025). They tell surgeons how to drill, not how long implants last.

For comparison, across all brands of modern implants, a 2019 review of 18 studies followed for 10 years found 96.4% still in place (Howe 2019). The bone, your health and the surgeon's plan weigh at least as much as the brand.

Do Osstem's studies count for Hiossen?

Partly. The Hiossen ET III and the Osstem TS III share the design: both are tapered implants with an 11 degree Morse taper and internal hex connection and an SA surface, as described in Hiossen's brochure and in the Osstem study below (Lim 2025). So Osstem's results are the closest evidence there is. They are still studies of implants made in Korea, not in Pennsylvania, so they show what this design does, not what one factory makes.

StudyWhat it foundLimits
Lim 2025, Seoul National University Dental Hospital98.3% of 2,474 Osstem TS III SA implants still in place at least 5 years after the tooth went onOne hospital, looking back at records
Kim 2014, Seoul National University Bundang Hospital95.4% of 467 older Osstem implants in place at 7 yearsOlder Osstem lines, not all TS III

The full Osstem record, study by study, is on our Osstem page, linked under Read next.

Hiossen vs Straumann

  • Record: Straumann has two 10-year studies of its older SLA surface, with 98.8% and 99.7% of implants still in place (Buser 2012; van Velzen 2015). Hiossen's longest published trial is 1 year.
  • Surfaces: both makers sell a surface meant to speed early healing, SLActive for Straumann and NH for Hiossen. In people, a 2025 review of six trials found SLActive held about the same stability as plain SLA over the first 12 weeks (Patel 2025). In people, Hiossen's NH held about the same stability as plain SA over a year, with no dip at week 2 (Tallarico 2021). Neither shows more teeth kept years later.
  • Head to head: no study we found compares Hiossen and Straumann in patients.
  • Price at our partner clinics: a full Hiossen tooth is A$1,214; Straumann SLActive is A$2,285.

The plain answer: Straumann has been studied for far longer. Hiossen has a good short record and shares its design with Osstem, which has a large 5-year record. A shorter record means less is known, not worse results.

What warranty comes with Hiossen?

We found no published maker warranty for Hiossen implants. Hiossen's website and patient leaflets talk about implants lasting a lifetime with good care, but that is a promise about care, not a written warranty. So our price list shows the 15 years that the clinic prints for Hiossen, not a maker's warranty.

  • An implant warranty, from a maker or a clinic, usually covers a new implant part if the implant itself fails. It usually does not pay for the surgery to place it, a bone graft, or a new crown.
  • Ask the clinic to write down what its years cover, what you pay if an implant fails, and what you must do to keep the warranty, such as yearly check-ups.
  • The crown on top has its own lab warranty, from the crown brand.
  • Keep the implant card and the label from the box. A warranty claim, in Vietnam or anywhere, starts with the brand, line, size and batch number.

Can I get Hiossen parts and care in Australia?

Probably, through Osstem Australia. The ARTG is Australia's register of approved medical devices, kept by the Therapeutic Goods Administration. In November 2026 we found an ARTG entry (273817) for a two-piece screw dental implant with Osstem Australia Pty Ltd as the sponsor and Hiossen Inc as the maker. Hiossen's website also lists Osstem Australia, in New South Wales, among its locations.

  • Check-ups, X-rays and cleaning around an implant need no brand parts. Any dentist or hygienist can do them.
  • Tightening a loose screw, a new connector or a new crown needs the matching driver and parts. A dentist who works with Osstem knows this design and can order through Osstem Australia.
  • Because the ET III and TS III share the design, ask your dentist to order by the exact line and size on your implant card, and to check the connection size (mini or regular).
  • Before you fly, ask your dentist at home whether they work with Osstem or Hiossen. If not, ask who nearby does.

What a Hiossen implant costs in Vietnam

What you getPriceHow it is worked out
One full toothA$1,214Price list: implant, Hiossen's own connector and the crown that comes with it
The implant part onlyA$1,020The full-tooth price minus the crown that comes with it
All-on-4, one jawA$10,283Price list: 4 implants, titanium bar, temporary teeth and 12 to 14 zirconia fixed teeth
All-on-6, one jawA$12,400The same with 6 implants
Both jaws, All-on-4 lower and All-on-6 upperA$22,683The two per-jaw prices added
Difference from Osstem, one toothA$428Hiossen A$1,214 minus Osstem A$786, both full teeth from the same list

The two trips, the 3D scan and the crown are part of the tooth price. Bone grafts, a sinus lift or sedation are added only if your case needs them, at the clinic's listed prices. You can swap the included crown for another brand at that brand's price.

Which situations suit Hiossen?

General guidance only. Your dentist decides after your 3D scan.

Your situationIs Hiossen a usual choice?Why
Good bone, healthy, no smokingYesGood bone and healing suit every brand on the list
Several implants, All-on-4 or All-on-6YesOffered for full arches at our partner clinics
You prefer an implant made in the USAYesHiossen says every implant is made and packaged in Pennsylvania
One implant, cost matters mostAsk about Osstem tooSame design family, A$428 less per tooth
You want the longest published recordAsk about Straumann or NobelThey have 10 to 20-year studies; Hiossen has 1-year trials
Soft or thin bone, a bone graft or slower healingAskThe plan matters as much as the brand; soft bone lowers survival with any brand (Foletti 2023)

What this means for a trip from Australia

  • The brand does not change the trips. A single implant takes two trips, 3 to 6 months apart: the implant goes in on the first, and the crown on the second.
  • Before you fly home after the first trip, ask for the implant card and the box label: brand (Hiossen), line (for example ET III NH), width, length and batch number.
  • Ask for a copy of the X-ray taken after the implant went in. A dentist at home uses it to compare later.
  • If something feels wrong between trips, a dentist at home can check the gum and take an X-ray without any Hiossen parts.

What to ask before you choose

  • Why Hiossen for me, from my scan, and not Osstem or another brand?
  • Which Hiossen line and surface, SA or NH, and what size?
  • Will the connector and screw be Hiossen's own parts?
  • What do the clinic's 15 years cover, and what do I pay if an implant fails?
  • Can I have the implant card, the box label and the X-ray before I fly home?
  • Can my dentist in Australia order parts for this implant through Osstem Australia?

Common beliefs that are not quite right

  • "Hiossen is a different brand from a different company." It is Osstem's own US company, selling the same design family.
  • "Made in the USA means it lasts longer." No study compares Hiossen and Osstem implants over the long term. Where they are made changes the paperwork and the price, not what the studies show.
  • "No long studies means it fails more." It means less is known. The short trials lost no implants, and the Osstem twin has a large 5-year record.
  • "The NH surface makes the implant last longer." Trials show steadier stability in the first weeks, not more teeth kept years later.
  • "FDA cleared means it is proven for decades." FDA clearance compares a device with ones already sold; it is not a long-term study.
  • "No Australian dentist can fix it." Dentists who work with Osstem know the design, and Osstem Australia is the sponsor on the register.

How does The Hudson help?

The Hudson is not a clinic. We are a small team in Hanoi. We audit every clinic we work with and pick the one we trust most for each case. We show you every implant brand on the list with its warranty and price, ask the dentist which brand and size suits your bone and why, and make sure you leave with the implant card and box label. You choose. Someone from our team comes to every appointment with you.

How we make money

You don't pay us anything. When you go ahead with treatment, the clinic pays us a referral fee for each patient. It doesn't change your price: you pay the clinic's normal price, the same as if you walked in yourself.

Quick answers

Is Hiossen the same as Osstem?

Same owner and design family: Hiossen is Osstem's US company, and its ET III is the twin of the Osstem TS III. Hiossen says its implants are made in Pennsylvania.

Are Hiossen implants good?

In two small trials no Hiossen implant was lost in the first year. We found no Hiossen study of 5 years or longer; the Osstem twin has 98.3% at 5 years in 2,474 implants (Lim 2025).

Is Hiossen better than Osstem?

No study compares them over the long term. They share the design; Hiossen is made in the USA and costs more at our partner clinics.

Does Hiossen have a lifetime warranty?

We found no published maker warranty. Our price list shows the 15 years the clinic prints; ask what they cover.

How much is a Hiossen implant in Vietnam?

A full tooth with its crown is A$1,214 at our partner clinics; All-on-4 is A$10,283 per jaw.

See your own price

Pick Hiossen or another brand in the calculator, and see the price of your tooth and your whole trip.

Open the price calculator

Sources