Not all zirconia is the same: what do 3Y, 5Y, multilayer and 'high translucency' mean?
The number before the Y is how much yttria, a stabilising oxide, is in the zirconia, in percent by molecule. More yttria makes zirconia more see-through but less strong. In one lab test, 3Y zirconia reached about 1,407 MPa, 4Y about 1,147 MPa and 5Y about 657 MPa (Schwab 2026). 3Y is the strong, more opaque kind used for back teeth, bridges and full arches. 5Y is the most lifelike for single front teeth, and 4Y sits between. Multilayer zirconia stacks shades, and sometimes grades, in one block, so a crown can be stronger at the base and more see-through at the edge. Labels such as 'high translucency' are maker names, not grades. That is why a quote that says only 'zirconia', or only a brand name, does not tell you what you are getting.
- 3Y zirconia about 1,407 MPa, 4Y about 1,147 MPa, 5Y about 657 MPa in one lab test (Schwab 2026).
- In multilayer blocks, the base layers reached up to 1,143 MPa and the see-through edge layers fell to about 572 MPa (Lohbauer 2026).
- Solid zirconia single crowns: 96.8% still in place after five years in a 2026 review (Pjetursson 2026).
Zirconia grades at a glance
| Grade | What it is | Strength in lab tests | How see-through | Usually used for |
|---|---|---|---|---|
| 3Y | About 3% yttria; the classic, strongest kind, now also made in more see-through versions | About 1,407 MPa in one test (Schwab 2026); makers list about 1,100 to 1,200 MPa | Least | Back teeth, bridges, full arches, dark teeth |
| 4Y | About 4% yttria; a middle grade | About 1,147 MPa in the same test (Schwab 2026); one maker lists 748 MPa | Middle | Front and back single crowns, short bridges |
| 5Y | About 5% yttria; the most see-through grade | About 657 MPa in the same test (Schwab 2026); makers list about 560 to 800 MPa | Most | Single front crowns and veneers |
| Multilayer | Several shades, and sometimes several grades, stacked in one block | Varies by layer: up to 1,143 MPa at the base, about 572 MPa at the edge in one test (Lohbauer 2026) | Changes from base to edge | Crowns that need a natural colour change from gum to edge |
MPa (megapascal) is a unit of strength in a bending test. The numbers above come from lab tests, and different makers test in different ways, so compare grades within one maker's range rather than across makers. For reference, lithium disilicate (E-max) measured 377 MPa in a lab test that put zirconias at 539 to 1,215 MPa (Carrabba 2017). Even the most see-through zirconia is stronger than the glass ceramic many front crowns are made of.
What the Y numbers actually mean
Pure zirconia cracks as it cools, so makers add a stabiliser called yttria (yttrium oxide). The number tells you roughly how much: 3Y means about 3 mol% yttria, 5Y about 5 mol%. You will also see longer names such as 3Y-TZP or 5Y-PSZ. They describe the same thing in more technical words.
- With about 3% yttria, the zirconia is made almost entirely of tiny crystals of one type. When a crack starts, these crystals change shape and squeeze the crack shut. That is why 3Y is so tough.
- With more yttria, more of a second crystal type forms. It lets light through more easily, so the crown looks more like a natural tooth, but it does not squeeze cracks shut in the same way.
- So translucency and toughness pull in opposite directions. A 2026 review of 58 lab studies put it plainly: higher yttria content improves translucency but lowers strength and fracture toughness (Bakitian 2026).
Yttria is not the only factor. Grain size, the amount of a sintering aid called alumina, the firing and the thickness of the crown also change how see-through it is (Yousry 2024). Two 5Y products from different makers can look and behave differently.
This is why zirconia has changed so much. Older zirconia was strong but chalky, so it was mostly used under layered porcelain or on back teeth. A 2018 review noted that classic zirconia lacked the looks of glass ceramics and was limited at the front of the mouth (Zhang and Lawn 2018). The newer, higher-yttria grades were made to fix that.
Strength against looks: how big is the trade-off?
The drop in strength is large, but so is the starting point.
| Study or maker | Strongest grade | Middle grade | Most see-through grade |
|---|---|---|---|
| Schwab 2026, 3Y, 4Y and 5Y from one test | 1,407 MPa (3Y) | 1,147 MPa (4Y) | 657 MPa (5Y) |
| Carrabba 2017, three zirconias from one maker | 1,215 MPa | 983 MPa | 539 MPa |
| One maker's own figures (Kuraray Katana range) | 1,150 MPa, translucency 45% | 748 MPa, translucency 49% | 557 MPa, translucency 51% |
In each series, the most see-through grade has a bit under half the strength of the strongest. In the Carrabba test, the most see-through zirconia was still stronger than lithium disilicate, and the authors suggested limiting it to bridges of up to three units (Carrabba 2017).
Lab strength does not translate one to one into the mouth. In a test of five-unit bridges with deliberately thin joints, all bridges broke at the joint, and the difference in strength between 3Y and 4Y did not show as a clear difference in breaking load (Schwab 2026). Shape, thickness and the joints between bridge teeth matter as much as the grade.
Thin sections are where see-through zirconia is most at risk. A review of lab studies warned that care is needed with thin sections of aesthetic zirconia, especially where biting force is high (Fathy 2021).
What 'high translucency', 'super' and 'ultra' really say
Makers name their products for marketing, and the words do not line up between brands. 'High translucency' sounds like the most see-through grade, but in one well-known range, the products called HT and HTML are strong 3Y-type grades and among the least see-through in that range (about 1,125 to 1,150 MPa, translucency 45%), while 'super' and 'ultra' are the more see-through ones. In one crown study, the product called HTML was used as the 3Y grade (Güney 2026).
- HT, high translucency: often a newer, more see-through version of 3Y.
- ST or STML, super translucent: often 4Y. In one crown study, the product called STML was used as the 4Y grade (Güney 2026).
- UT or UTML, ultra translucent, or names with 'esthetic': often 5Y. One maker describes its esthetic zirconia as 5 mol% yttria.
- ML or multi: multilayer, with a colour gradient. Some also change grade from base to edge.
- Prime, gradient or hybrid: usually a block that combines two grades.
So the only reliable answer is the maker's own product sheet for the exact product. The words on a quote or a website are not enough.
Multilayer zirconia: one block, several layers
A natural tooth is darker and more opaque near the gum and lighter and more see-through at the biting edge. A multilayer block copies this. The lab cuts the crown from the block so the darker layers sit at the gum and the clearer layers at the edge.
- Colour-only multilayer: the shade changes through the block, but the grade is the same throughout.
- Strength-gradient multilayer: the base is a strong grade such as 3Y, and the edge is a more see-through grade such as 5Y. In one crown test, a 3Y-to-5Y gradient crown resisted breaking as well as a solid 3Y crown, and both did better than a 4Y crown with the same edge design (Güney 2026).
- 4Y-to-5Y multilayer: a middle grade at the base and the most see-through grade at the edge.
The layers are not equally strong. In a 2026 test of four multilayer brands, the base layers reached up to 1,143 MPa, while the see-through edge layers fell to about 572 MPa. Only one of the four stayed above 800 MPa in every layer, the threshold for the widest range of uses, including long bridges (Lohbauer 2026).
How the lab positions the crown inside the block, the firing, the design and the surface finish all change the result. A review of 58 lab studies found that no multilayer approach was clearly stronger than the others (Bakitian 2026). The lab's skill matters as much as the block.
Which grade suits which tooth?
| Your situation | Grade usually chosen | Why |
|---|---|---|
| A molar or premolar crown | 3Y, 4Y or a strong-base multilayer | Chewing force is high and looks matter less |
| You grind or clench heavily | 3Y or a strong-base multilayer, plus a night guard | Thin, see-through grades are most at risk under high force (Fathy 2021) |
| A single front crown on a light, healthy tooth | 4Y, 5Y or multilayer | The more see-through grades look most like enamel |
| A front crown on a dark tooth or a metal post | A more opaque grade, or an opaque layer underneath | See-through grades let the dark base show |
| A three-unit bridge | 3Y, 4Y or a multilayer with a strong base | The joints between teeth carry the load |
| A long bridge or a full-arch bridge on implants | 3Y or a multilayer that stays strong in every layer | Long spans need the strongest grades (Lohbauer 2026) |
| A veneer on a front tooth | Usually lithium disilicate; zirconia veneers are often 4Y or 5Y | Veneers are thin and rely on the bond |
Implant experts in Europe made the same point for crowns and bridges on implants: the strength of translucent and shaded zirconias differs a lot between grades, and that must be considered for each use (Pjetursson, Fehmer and Sailer 2022). One maker classes its 5Y zirconia for crowns and bridges with at most one missing tooth between two crowns, not for longer bridges.
The right grade also depends on space. A see-through grade needs more thickness to be safe, so it can mean trimming more tooth. Where space is tight, a stronger grade can be made thinner. That decision belongs to the dentist who sees your bite.
What the clinical studies show
Most grade comparisons come from the lab. Clinical studies mostly report zirconia as a group, without splitting by grade.
- Solid (monolithic) zirconia single crowns: 96.8% were still in place after five years in a 2026 review, close to metal-ceramic crowns at 97.1% (Pjetursson 2026).
- Solid 3Y zirconia on back teeth: 98% of 50 crowns survived five years, with complications in 6% and no fractures (Solá-Ruiz 2021).
- Solid 5Y zirconia on back teeth: none of the 48 zirconia crowns and partial crowns needed replacing over a median of five years, though the authors call the evidence for 5Y on back teeth still limited (Kern 2026).
So far, 5Y used sensibly has done well in the few studies that exist. The long-term record, ten years and more, belongs to the older, stronger grades. Where the evidence is thin, it is fair to choose the stronger grade for the teeth that work hardest.
Why a quote that says only 'zirconia' is incomplete
Zirconia is a family of materials, not one material. One brand name can cover grades from 3Y to 5Y, and the strongest and most see-through product in one range can differ by more than half in strength.
- Katana, from Kuraray Noritake, is a range: products from about 557 MPa to 1,150 MPa, plus multilayer blocks.
- Lava covers two different materials: Lava Plus is a 3Y zirconia and Lava Esthetic a 5Y zirconia, according to the maker.
- DD Bio from Dental Direkt includes a high-translucency product of about 1,150 MPa, and the same company sells a separate super-translucent one.
- Orodent sells many lines under one brand, from about 700 MPa to 1,400 MPa.
What a complete crown quote names
- The maker and the product line, not only 'zirconia' or a brand name.
- The grade: 3Y, 4Y, 5Y or multilayer, and for multilayer, whether the grade changes from base to edge.
- Solid (monolithic) or with porcelain layered on top.
- Which grade goes on which tooth, if your front and back teeth differ.
- The lab warranty, and what it covers.
- Whether you get the lab card or box label with the product name.
You cannot check the block yourself once the crown is made. What you can do is get the product named in writing before treatment, and ask for the lab record afterwards.
Zirconia crowns on our list in Vietnam
| Brand | Per tooth | 16 teeth | 20 teeth | Lab warranty |
|---|---|---|---|---|
| Standard | ||||
| Katana | A$222 | A$3,560 | A$4,440 | 7 years |
| Ceramill | A$286 | A$4,580 | A$5,720 | 10 years |
| DD Bio | A$333 | A$5,330 | A$6,660 | 10 years |
| Plus | ||||
| Origin Beyond Plus | A$357 | A$5,720 | A$7,140 | 10 years |
| Lava Plus | A$444 | A$7,110 | A$8,880 | 15 years |
| Lava Esthetic | A$554 | A$8,870 | A$11,080 | 15 years |
| Premium | ||||
| Orodent Bleach | A$666 | A$10,050 | A$12,560 | 19 years |
| Origin Apex | A$971 | A$15,540 | A$19,420 | 15 years |
Updated Nov 2026
Free flight& hotelClaim nowT&Cs apply
Zirconia crowns at our partner clinics in Vietnam cost A$222 to A$971 per tooth, depending on the brand. That range runs from the lowest to the highest crown on the list above. Six front crowns cost A$1,332 to A$5,826, the per-tooth price times six.
- The list names the brand. Several of these brands sell more than one grade, so ask the clinic which product line and grade the lab uses for each of your teeth.
- A higher price does not mean a weaker or a stronger crown, and it does not by itself mean a more natural look. Shade, shape and the lab's finish decide the look; the grade and the design decide the strength.
- A longer lab warranty is the lab's promise to redo the crown. It is not a measure of strength.
What this means for a crown trip from Australia
- The grade does not change the number of days. Crowns need one trip of up to 7 days.
- Ask for the grade per tooth in writing before you fly, and keep the lab card or label when you leave.
- If a dentist at home ever adjusts your crown, the grade and maker help them choose how to polish it. Rough grinding weakens zirconia and smooth polishing helps it (Fathy 2021).
- If you grind, ask about a night guard, whichever grade you choose.
Common beliefs that are not quite right
- "All zirconia is the same." Grades differ by more than half in strength in lab tests (Schwab 2026).
- "High translucency means the most see-through." In one major range, the products called HT and HTML are among the least see-through.
- "Multilayer is always stronger." Its edge layers can be much weaker than its base (Lohbauer 2026), and no multilayer design was clearly stronger than the others (Bakitian 2026).
- "The most see-through zirconia is fragile." It is weaker than 3Y, but in one test it was still stronger than lithium disilicate (Carrabba 2017).
- "The more expensive brand is the stronger one." Price and grade do not track each other; ask for the grade.
- "Front teeth need the most see-through grade." Not on a dark tooth, which can need a more opaque one.
How does The Hudson help?
The Hudson is not a clinic. We are a small team in Hanoi. We audit every clinic we work with and pick the one we trust most for each case. We show you every crown on the list with its warranty and price, ask the clinic which product line and grade goes on each of your teeth and why, and make sure the answer is written on your plan. You choose. Someone from our team comes to every appointment with you, including the shade choice and the fitting.
How we make money
You don't pay us anything. When you go ahead with treatment, the clinic pays us a referral fee for each patient. It doesn't change your price: you pay the clinic's normal price, the same as if you walked in yourself.
Quick answers
What is the difference between 3Y and 5Y zirconia?
3Y has about 3% yttria and is the strongest, least see-through kind. 5Y has about 5% and is the most see-through, with roughly half the strength in lab tests (Schwab 2026).
Is 5Y zirconia strong enough for back teeth?
In one five-year study, none of 48 back-tooth 5Y crowns and partial crowns needed replacing (Kern 2026). The evidence is still limited, so many dentists keep stronger grades for heavy biters and bridges.
What is multilayer zirconia?
A block with several shades, and sometimes several grades, stacked from base to edge, so the crown looks darker at the gum and clearer at the edge. Its edge layers are weaker than its base.
Is high translucency zirconia the same as 5Y?
Not always. The name is the maker's. In one major range, the products called HT and HTML are strong 3Y-type grades; the more see-through grades are called super or ultra.
Which zirconia is used for All-on-4 bridges?
Long, full-arch bridges need the strongest grades, usually 3Y or a multilayer that stays strong in every layer (Lohbauer 2026). Ask which product your bridge is milled from.
Have a crown quote that only says 'zirconia'?
Send it to us. We ask the dentist at a partner clinic in Vietnam which product line and grade they would use for each of your teeth, and why. Free.
Send us your quoteSources
- Schwab T et al. Biaxial flexural strength and fracture behavior of five-unit monolithic zirconia fixed dental prostheses: an experimental and finite element study. J Funct Biomater, 2026.
- Lohbauer U, Schwarz M, Belli R. Flexural strength and clinical classification of different layers in 4/5Y-PSZ zirconia materials. J Funct Biomater, 2026.
- Güney B et al. Effects of yttria content and margin design on the fracture resistance of monolithic zirconia crowns. J Funct Biomater, 2026.
- Carrabba M et al. Translucent zirconia in the ceramic scenario for monolithic restorations: a flexural strength and translucency comparison test. J Dent, 2017.
- Bakitian F. Influence of manufacturer, laboratory, clinical, and aging-related factors on the mechanical properties of multilayered zirconia: a systematic review of laboratory studies. BMC Oral Health, 2026.
- Yousry M et al. Translucency of recent zirconia materials and material-related variables affecting their translucency: a systematic review and meta-analysis. BMC Oral Health, 2024.
- Zhang Y, Lawn BR. Novel zirconia materials in dentistry. J Dent Res, 2018.
- Fathy SM et al. Flexural strength and translucency characterization of aesthetic monolithic zirconia and relevance to clinical indications: a systematic review. Dent Mater, 2021.
- Pjetursson BE, Fehmer V, Sailer I. EAO position paper: material selection for implant-supported restorations. Int J Prosthodont, 2022.
- Pjetursson BE et al. Survival, failure and complication rates of metal-ceramic, veneered and monolithic all-ceramic tooth-supported single crowns, part 1. Int J Prosthodont, 2026.
- Solá-Ruiz MF et al. Prospective study of monolithic zirconia crowns: clinical behavior and survival rate at a 5-year follow-up. J Prosthodont Res, 2021.
- Kern JS et al. Marginal fit and five-year outcomes of posterior monolithic zirconia restorations: a randomized paired and observational clinical study. J Dent, 2026.
- Kuraray Noritake. Katana zirconia range: strength and translucency by grade (UTML, STML, HT, HTML Plus, YML).
- 3M (now Solventum). Lava Esthetic fluorescent full-contour zirconia: technical product profile (5 mol% yttria, 800 MPa, ISO 6872 class 4).
- Dental Direkt. DD Bio ZX2 zirconia: product data (1,150 MPa).