Dental FAQs

What is smile design, and do I need it before veneers or crowns?

Smile design is the planning step before veneers or front crowns. The dentist uses photos, a short video, measurements and a scan to plan new teeth that fit your face, then shows you the plan as a trial smile: a thin resin copy of the new teeth placed over your own, before any tooth is shaped. Digital smile design (DSD) does the planning in software. You need it for any plan that changes the teeth that show when you smile, but not for a back crown. The trial smile is a close guide to shape and length, not an exact copy: the final colour and see-through edge come from the lab.

  • In a trial of 150 adults, patients planned with digital smile design scored their satisfaction 85.4 out of 100, against 79.8 with traditional planning (Luniyal 2023).
  • In a lab study, every mock-up came out slightly larger than the planned wax-up, most of all at the biting edge (Moldovani 2023).
  • The "golden proportion" some design software uses was found in only 4.0% and 2.8% of 175 young adults' natural smiles (Mosomi 2024).

Smile design at a glance

StepWhat it isWhat it gives you
Photos and videoYour face and teeth smiling, talking and at restA plan made for your lips and face, not only your teeth
Measurements and scanTooth sizes, the gum line, the bite and a 3D scanReal numbers for the lab
The designThe new teeth drawn on your photos or built on the scanYou see the idea and can change it on screen
Wax-upA model of your teeth with the new shapes added, in wax or softwareThe shape fixed in 3D, ready to copy into your mouth
Trial smile (mock-up)A thin resin copy of the wax-up, placed over your own teethYou see and feel the new shape, and nothing is cut
Your approvalYou and the dentist agree the shape, or change itA target the dentist and lab work to

Smile design is not a treatment. It is how a veneer or crown plan is made and checked before it becomes real. The trial smile matters most, because it is the last point where every change costs your teeth nothing.

What is smile design?

Smile design means planning new teeth from the face inwards. Before any single veneer or crown is made, the dentist decides how the whole smile should look: where its middle sits, how long the front teeth are, how the biting edges follow the lower lip, and how wide each tooth is next to its neighbours.

A full smile design usually includes:

  • Photos of your face and teeth: a wide smile, lips at rest, both sides, and a close-up of the teeth.
  • A short video of you talking and laughing, because teeth look different when you move.
  • Measurements: how much tooth shows with your lips relaxed, each front tooth's width and length, and the gum line.
  • A scan of your teeth, now usually an intraoral scan (a small camera passed over the teeth), and a bite check.
  • A wax-up: a model of your teeth with the new shapes added, by a technician in wax or in software.
  • A mock-up, or trial smile: the wax-up copied into tooth-coloured resin and placed over your own teeth.

An average smile shows the six upper front teeth and the premolars behind them (Tjan 1984, 454 smiles). So a design usually covers 8 to 10 upper teeth, even when only a few are treated: the new teeth have to sit well with the ones beside them.

What does the "digital" part add?

Dentists planned smiles long before computers, with photos, plaster models and a hand-made wax-up. Digital smile design does the same in software. The term was made popular by a Brazilian dentist and ceramist, Christian Coachman. The digital part adds:

  • Measurements on your photos, against lines for the middle of your face, your eyes and your lips.
  • Several versions, quickly. A hand-made wax-up gives one version of the result (Sancho-Puchades 2015). On screen, a longer and a shorter version can sit side by side.
  • A 3D plan joined to the scan of your teeth, which the lab can open.
  • Mock-ups printed or milled straight from the file.
  • Files that travel: the design, scan and photos go to the lab, and later to your dentist at home.

There are two levels. A 2D design is a drawing over your photos. It is quick and can be done before you fly, but it is a picture, not a measurement of your mouth. A 3D design starts from the scan and can be turned into a trial smile. Good plans use both: 2D to agree the idea, 3D to make it real.

Newer AI tools suggest tooth shapes and can show a design on a video of your face within minutes (Pachiou 2025). They are useful for a first look. A review of seven studies of AI smile design found a moderate risk of bias and signs of publication bias, so the good results may be overstated (Saini 2025).

What do the studies say about satisfaction?

Patients like seeing the result first. The studies agree on that, but most are small, and none follows patients for many years.

StudyWhoWhat it found
Luniyal 2023, randomised trial150 adults having smile treatmentSatisfaction 85.4 out of 100 with digital design, 79.8 with traditional. At 3 months, fit, bite and look were rated excellent in 92% and 78%
Cattoni 2021, randomised trial50 people having All-on-4 teethIn the digital group, 93% rated the smile preview and 98% the mock-up test very effective
Alwabel 2025, review of 7 studiesVeneers, crowns and bondingBetter satisfaction, acceptance and communication; mixed study designs and some small samples
Saini 2025, review of 7 studiesAI smile design toolsBetter symmetry and lip line; moderate risk of bias and signs of publication bias
Pachiou 2025, Zurich25 dentists and 25 lay peopleLay people rated video mock-ups higher than dentists did

The last study holds a lesson. A design you love on screen is not always the one a dentist would choose, and the dentist is often the one who notices teeth that are too long, too even or too white. Look at your design together, and ask what the dentist would change.

How close is the trial smile to the final result?

Close in shape, not identical. Studies that measured mock-ups against the plan found small but real differences, and they disagree on which way of making them is closest.

StudyWhat was testedWhat it found
Moldovani 2023, lab studyMock-ups made 6 ways, against the wax-upEvery mock-up was larger than the wax-up; the biting edge was the least accurate part
Lo Giudice 2020, 10 adultsPrinted and milled mock-ups, against the 3D planBoth came out slightly larger; the printed ones fitted well, the milled ones needed adjusting
Cattoni 2019, lab study50 milled or hand-moulded mock-upsMilled ones were closer to their wax-up
Falahchai 2026, 14 patientsHand-moulded, printed and milled veneer mock-upsHand-moulded ones were the closest to the plan
Ahmed 2024, review of 20 studiesDigital and traditional veneer workflowsThe digital workflow was more predictable and accurate overall

What this means for you:

  • Trust the trial smile for shape, length and proportion, and decide those with it.
  • It can look slightly fuller than the final teeth, because it sits on your unshaped teeth and mock-ups tend to come out a little large.
  • The edges are the least exact part. If length matters to you, ask the dentist to measure it and write it down when you approve.
  • Digital is not automatically more accurate. The skill of the dentist and lab matters as much as the method.
  • We found no study measuring how closely final veneers matched the approved mock-up in real patients. The try-in is where you check that yourself.

What a smile design can and cannot promise

It can show youIt cannot show you
The shape, length and width of the new teeth on your own faceThe exact final colour: mock-up resin comes in a few shades and is not porcelain
How the edges follow your lower lip when you smileThe see-through edge and depth of porcelain, added later by the lab
Whether the new teeth change your speechHow your gums will settle around the final teeth
How many teeth need treatment for an even smileHow long the veneers or crowns will last
Whether you need braces, gum work or whitening firstThe final size to a fraction of a millimetre

A design also protects your enamel. The dentist can shape the teeth through the approved mock-up, so enamel comes off only where the new shape needs room (Gresnigt 2011, a case report showing the technique). A veneer takes about 3% to 30% of the visible front tooth, a crown about 63% to 72% (Edelhoff and Sorensen 2002, on model teeth), and a good design often shows that veneers, bonding or whitening will do instead of crowns on healthy teeth.

Do I need smile design before veneers or crowns?

Your situationSmile design?Why
Veneers or crowns on 4 or more front teethYes, with a trial smileEvery tooth that shows changes, so the whole smile is planned
Making teeth longer, or closing gapsYes, with a trial smileLength and width change your lips and speech
One or two front teeth matching your ownA short design and a mock-up of the shapeThe shade is matched in daylight against the teeth beside it
Uneven gum line or a gummy smileYesIt shows whether gum work comes first, which changes the order and days
Crooked or crowded teethYesIt shows when braces or aligners first would remove less tooth
Replacing old front crowns you dislikeYesYou see the new shape before the old crowns come off
Crowns on back teeth onlyNoThey barely show; the bite check matters more
All-on-4 teethA tooth set-up and try-in does the same jobThe teeth are tried in before the final set is made

If a clinic plans veneers or front crowns without showing you the shape first, you are agreeing to a result you have never seen. Ask for the trial smile, or ask why your case does not need one.

The steps, and how long they take

  1. Photos and a short video on your phone at home: a few minutes.
  2. A video consult with the clinic: about 30 minutes, our partner clinic says.
  3. A first 2D design and a written plan with the teeth, material and price. Our partner clinic says the written quote comes within 48 hours.
  4. On your first dental day in Vietnam: the scan, bite check, shade, 3D design and trial smile. If you want changes, the design is adjusted and checked again before any tooth is shaped.
  5. Once you approve, the teeth are shaped through the design and covered with temporaries that copy it. The lab makes the final teeth to the approved design, and you see them tried in before bonding.

At the partner clinic behind most of the veneer brands on our list, the digital smile design and mock-up are part of the veneer price of A$328 to A$971 per tooth, and changes to the design are not charged extra (the clinic's 2026 profile). Some clinics list smile design as a separate charge, so check your quote.

How smile design fits a veneer or crown trip to Vietnam

Veneers in Vietnam take one trip of about 7 to 8 days, and the smile design is built into it. The first design is made from your photos before you fly, and the trial smile goes on your teeth on day 2.

WhenWhat happens
Before you flyPhotos, a video consult, a first 2D design and a written plan. Ask to see the design photos before you book flights.
Day 1Arrive and rest.
Day 2Consult, scans, bite check and shade choice. The trial smile goes on, and you check it by a window, on camera and while talking.
Days 3 to 4Once you approve the look, the teeth are shaped through the design and scanned. Temporaries copy the design while the lab makes the veneers.
Days 5 to 6Try-in, then bonding. The bite is checked and the edges polished.
Days 7 to 8Final check and fly home.
  • The temporaries are a second trial. If something feels wrong when you talk or eat, say so before the try-in.
  • Front crowns follow the same idea. Crowns take up to 7 days in one trip, with the teeth shaped on the first dental day, so the trial smile comes before that. Tell us before you book. Zirconia crowns at our partner clinics cost A$222 to A$971 per tooth.
  • Before you fly home, ask for your design files, scan and photos of the approved trial smile. If a veneer ever chips, a dentist at home can copy the shape. Our partner clinic sends scan files to your dentist at home.

Photos that help the first design:

  • Your face from the front, with a big natural smile, and again with lips relaxed and slightly apart.
  • Each side at about 45 degrees, smiling, and a close-up of your teeth biting together with your lips pulled back.
  • A short video of you talking and laughing.
  • Daylight, facing a window, the phone at the height of your mouth, and no filter.

How to use the trial smile to avoid the over-white, over-even look

The look called "Turkey teeth" comes from one very white shade and teeth that are all the same size and shape. The trial smile is where you catch the second, and it helps with the first.

  1. Check the shapes, not only the length. Your middle front teeth, the teeth beside them and your canines should each have their own shape. Tooth size differs by sex and ethnic background (Wang 2021, review of 17 studies), and few natural smiles follow the golden proportion (Mosomi 2024).
  2. Ask for small differences: slightly rounded corners, a little variation between left and right, and edges that are not in one ruler-straight line.
  3. Look away from the chair. Use a hand mirror by a window, and take a photo and a video on your phone. A photo shows things a mirror can miss.
  4. Talk and laugh with it on. Say "fifty-five" and "Mississippi". If the edges catch your lower lip or you lisp, the length needs changing.
  5. Send the photos to someone who knows your face. A partner or friend notices when teeth look too big for you.
  6. Choose the shade separately, in daylight, against your lower teeth and skin. Natural teeth darken with age (Kim 2018, 674 people), and a tooth lighter than its neighbours is noticed at small differences (Ntovas 2024).
  7. If you want lighter teeth, whiten your own teeth first, then match the veneers or crowns. They keep the colour they were made in.

Someone from our team is in the room for the trial smile, the shade choice and the try-in, so you have a second pair of eyes before anything is fixed.

What can go wrong with smile design?

  • The design comes from a template, not your face. Ask how it was adapted to you, and approve it in daylight and on camera, not under the chair light alone.
  • The final teeth come out a little different from the trial smile. Ask for the approved photos and length to be saved in your file, and compare the final teeth with them at the try-in, before bonding.
  • The plan treats more teeth than you need, because the design looks better with more. Ask which teeth are needed for an even smile and which are optional.
  • The design ignores the bite. Ask for the bite to be checked, and whether you need a night guard: in a long Innsbruck study, people who ground their teeth had 7.7 times the risk of veneer failure (Beier 2012).

What to ask about smile design

  • Are the smile design and trial smile included in my quote?
  • Can I see a first design from my photos before I fly?
  • Will I see a trial smile on my own teeth before any tooth is shaped, and can it be changed?
  • Will you shape my teeth through the approved trial smile, so only the enamel the new shape needs is removed?
  • How will the lab copy the shape I approve, and will you check it at the try-in?
  • Can I choose the shade in daylight, separately from the mock-up?
  • Can I have my design files, scan and photos to take home?

Common beliefs that are not quite right

  • "The software designs a natural smile on its own." It suggests shapes from templates and rules like the golden proportion, which most natural smiles do not follow. The dentist and lab adapt it to your face, and the evidence on AI design tools is still weak.
  • "The mock-up is exactly what I will get." It is a close guide to shape and length. Mock-ups tend to come out slightly large, the edges are the least exact part, and the colour comes from the porcelain later.
  • "Digital is always more accurate than hand-made." Studies disagree. In one clinical study, hand-moulded mock-ups were closer to the plan than printed or milled ones.
  • "Smile design is only for a full makeover." It helps with two or four front teeth too, because the new teeth have to match their neighbours.
  • "If I like it on screen, it is right." Lay people rated mock-ups higher than dentists did. Ask what the dentist would change, and check your bite and speech.

How does The Hudson help?

The Hudson is not a clinic. We are a small team in Hanoi. We audit every clinic we work with and pick the one we trust most for each case. We send your photos to that clinic, get the first design and a written plan before you fly, and go through it with you. We book your hotel and airport pickup, and someone from our team comes to every appointment with you, including the trial smile, the shade choice and the try-in.

How we make money

You don't pay us anything. When you go ahead with treatment, the clinic pays us a referral fee for each patient. It doesn't change your price: you pay the clinic's normal price, the same as if you walked in yourself.

Quick answers

What is digital smile design?

Planning new teeth in software, from photos, video and a scan of your teeth. The plan can be changed on screen, sent to the lab and made into a trial smile on your own teeth.

Is a mock-up the same as temporary veneers?

No. A mock-up goes over your unshaped teeth before anything is cut, so you can still say no. Temporary veneers go on after the teeth are shaped.

Does a smile design show the final colour?

Not exactly. Mock-up resin comes in a few shades and is not porcelain. Choose the shade separately, in daylight, against your own teeth.

How long does smile design take?

The first design is made from your photos before you fly; our partner clinic says the written plan follows within 48 hours. The trial smile is done on your first dental day in Vietnam, before any tooth is shaped.

Do I need smile design for one crown?

For a back crown, no. For one front crown, a short design of the shape helps, but matching the shade to the tooth beside it matters most.

Want to see your new smile before you fly?

Send us a few photos of your smile. We will get a first design and a written plan from our partner clinic in Vietnam, so you see the shape before you book. Free.

Send my photos

Sources