Dental FAQs

What are E-max Press veneers, are they porcelain, and how strong are they?

E-max Press is a lithium disilicate glass ceramic made by Ivoclar in Liechtenstein. It is a ceramic, so yes, it is what most people call porcelain, but a stronger kind than the classic feldspathic porcelain: Ivoclar gives it a strength of 400 MPa. "Press" means the lab melts a small ingot and presses it into a mould of your veneer, made from a wax model, rather than milling it from a block. Ivoclar allows E-max Press veneers as thin as 0.3 mm, and our partner clinic's sheet lists 0.3 to 0.5 mm of enamel removed. The veneer is bonded to the tooth with resin cement, and that bond is a large part of its strength. Pressed lithium disilicate veneers have some of the longest records of any veneer: in one study of 413 veneers, 95% were still in place at 10 years and 87% at 20 (Aslan 2019), and a 2025 review of 29 studies found 96.81% at about 10 years (Klein 2025). At our partner clinics in Vietnam, Emax Press veneers cost A$328 a tooth with a 10 years lab warranty.

  • E-max Press: lithium disilicate glass ceramic, 400 MPa (Ivoclar's figure); veneers from 0.3 mm thick.
  • Pressed lithium disilicate veneers: 98% at 5 years, 95% at 10, 91% at 15 and 87% at 20 in 413 veneers (Aslan 2019).
  • Emax Press at our partner clinics in Vietnam: A$328 per tooth, 10 years lab warranty.

E-max Press at a glance

QuestionAnswer
Who makes itIvoclar, Schaan, Liechtenstein
What it isLithium disilicate glass ceramic (also written LS2)
Is it porcelain?Yes, in everyday words: it is a dental ceramic. Dentists call it a glass ceramic
How it is madePressed: a heated ingot is pressed into a mould made from a wax model of your veneer
Strength, maker's figure400 MPa
Thinnest veneer, maker's figure0.3 mm
Enamel removed, our partner clinic's sheet0.3 to 0.5 mm
Longest study20 years: 87% of 413 pressed lithium disilicate veneers in place (Aslan 2019)
Lab warranty at our partner clinics10 years
Price per tooth in VietnamA$328

A veneer is a thin shell bonded to the front of a tooth to change its colour, shape or size. MPa (megapascal) is a unit of strength in a bending test. Prices from our partner clinics' list, updated Nov 2026.

Are E-max veneers porcelain?

Yes, in the way most people use the word. "Porcelain veneer" in everyday speech means any ceramic veneer. Dentists split ceramics into types, and E-max is one of them.

KindWhat it isExample
Feldspathic porcelainThe classic porcelain, built up by hand in layersLab-made layered veneers
Leucite glass ceramicA glass with leucite crystals, pressed or milledIPS Empress
Lithium disilicate glass ceramicA glass filled with fine lithium disilicate crystals, pressed or milledIPS e.max Press, IPS e.max CAD, GC Initial LiSi Press
ZirconiaA crystal ceramic with no glass, milledSeveral zirconia veneer brands
  • The glass part is what lets light through and what the cement bonds to after the surface is etched with acid. That is why glass ceramics such as E-max bond so well to enamel.
  • The crystals are what make E-max stronger than the classic porcelain. Ivoclar calls its strength "outstandingly high" at 400 MPa.
  • So "E-max or porcelain?" is a question with no real choice in it. E-max is a porcelain; the choice is between kinds of ceramic.

For E-max against zirconia veneers, and for composite resin against ceramic, see our two comparison pages under Read next.

Pressed or milled: what "Press" means

E-max comes in two forms. IPS e.max Press is an ingot that the lab heats and presses into a mould. IPS e.max CAD is a block that a machine mills. Same family of material, two ways of shaping it.

  1. The dentist prepares your teeth and takes a scan or an impression.
  2. The technician builds each veneer in wax on a model of your teeth, or prints it from a digital design.
  3. The wax veneer is set in a heat-proof mould and burned out, leaving a veneer-shaped space.
  4. A lithium disilicate ingot is heated until soft and pressed into the space.
  5. The technician fits, shapes and colours the veneer, then glazes it.
  6. The dentist tries the veneers in, checks shade and fit, and bonds them.
  • Pressing gives thin, fine edges. A 2025 review of veneer studies found that pressed lithium disilicate veneers fitted better at the edges, and milled ones fitted better on the inside surface (Sudharson 2025).
  • The same review found longer survival reported for pressed veneers, up to 10 years, but rated the certainty of the evidence low (Sudharson 2025).
  • Milling is faster and needs less hand work. Both forms gave good-looking results in the studies.
  • Ivoclar sells E-max Press in four levels of translucency, so the lab can match a light tooth or hide a darker one.

How strong are E-max veneers?

Strong enough for front teeth when they are bonded well, which is what veneers are for. The number on the box matters less than you might think.

  • Ivoclar's figure for IPS e.max Press is 400 MPa. Lab tests by other groups give different numbers for the same material depending on the test and the shape tested, so figures from different studies cannot be compared one to one (Alghazzawi 2022).
  • Zirconia is stronger in a bending test, but strength is not what usually ends a veneer. In the long veneer studies, fractures and veneers coming off were both rare.
  • Once bonded to enamel, the veneer and tooth work as one. That is why the bond matters as much as the material.
  • Thin is not the same as weak for a bonded veneer. In one lab test, occlusal veneers only 0.5 mm thick, pressed from seven lithium disilicates including E-max Press and bonded to molars, broke at median loads of about 1,750 to 2,490 N after simulated chewing (Zumstein 2022).
StudyVeneersFracturesCame off
Aslan 2019, up to 20 years4136 (1.45%)9 (2.18%)
Aslan 2019, 10 years3640.55%1.09%

Grinding your teeth is a risk you can control. In a study of worn front teeth restored with ceramic veneers on the front and composite resin on the back, followed up to 8 years, grinding, poor cleaning and coffee or tea drinking were linked with more failures, most of them in the composite part (Lempel 2026). A night guard is the usual answer.

How long do E-max Press veneers last?

StudyWhat was followedWhat it found
Aslan 2019, 413 veneersPressed lithium disilicate veneers by three experienced dentists, average 11 years98% at 5 years, 95% at 10, 91% at 15, 87% at 20
Aslan 2019, 364 veneersPressed lithium disilicate veneers, two experienced dentists97.4% at 10 years; problems in 1.64%
Demirekin 2022, 358 veneersIPS e.max Press veneers wrapping the biting edge, on teeth with fluorosisAt least 99.7% estimated survival at 10 years
Klein 2025, review of 29 studiesCeramic veneers of every kindLithium disilicate 96.81% at about 10 years, with the fewest complications of the glass ceramics
Lempel 2026, 156 front teethFront veneers in IPS e.max Press or GC LiSi Press, with resin on the back of the tooth98.1% of the ceramic front veneers in place at up to 8 years
Edelhoff 2023, 274 restorationsPressed lithium disilicate on badly worn teeth, average 8.5 yearsNone lost; 5.5% had a problem that needed attention
Măroiu 2026, 50 restorationsIPS e.max Press veneers and partial coveringsAll in place at 3 years; none came off
  • Many of the longest veneer studies are of pressed lithium disilicate, which is one reason E-max Press is a reference material for veneers.
  • Some of these studies are from single practices with experienced dentists. Results elsewhere depend on the same care in preparation and bonding.
  • Ivoclar itself summarises six of its clinical studies of IPS e.max Press restorations (crowns and others, not only veneers) as 98.4% surviving at an average of 4 years. That is the maker's summary.

How much tooth is removed, and are E-max veneers reversible?

  • Ivoclar sets 0.3 mm as the thinnest E-max Press veneer. Our partner clinic's sheet lists 0.3 to 0.5 mm of enamel removed for Emax Press.
  • For comparison, a crown needs much more: Ivoclar asks for at least 1.5 mm of wall thickness for an E-max Press crown.
  • Removing enamel cannot be undone, so standard veneers are not reversible. If a veneer breaks or wears out, it is replaced with a new one.
  • Some teeth, small or set back, can take a veneer with little or no trimming. Whether yours can depends on the shape and position of your teeth.
  • E-max veneers are long-lasting, not everlasting: 87% were still in place at 20 years in the longest study (Aslan 2019).

Why the bonding matters

A veneer this thin gets most of its strength from being glued to enamel. The steps are the same in every good clinic.

  1. The inside of the veneer is etched with hydrofluoric acid. Ivoclar says E-max Press must be etched before it is fitted.
  2. A silane primer is applied to the etched surface so the cement can bond to the glass. In one lab test, longer silane time gave stronger bonds to lithium disilicate, and a separate silane primer bonded better than a universal adhesive alone (Almaskin 2022).
  3. The tooth is cleaned, etched and coated with a bonding agent, kept dry.
  4. The veneer is set with a light-cured resin cement, and the excess is cleaned away.
  5. The bite is checked and the edges polished.

Why veneers come off, and what to do if one does, is on our page about veneers coming off, linked under Read next.

Emax Press veneers in Vietnam

How manyPriceHow it is worked out
1 veneerA$328Price list, per tooth
4 veneersA$1,312The per-tooth price times 4
6 veneersA$1,968The per-tooth price times 6
8 veneersA$2,624The per-tooth price times 8
10 veneersA$3,280The per-tooth price times 10
  • Emax Press is the lowest-priced veneer on our list, with a 10 years lab warranty. Other veneers on the list run up to A$971 a tooth.
  • A lower price does not mean a weaker or less natural veneer. Pressed lithium disilicate such as Emax Press is the material in several of the longest veneer studies. The shade, shape and lab's finish decide the look.
  • Lisi Press, also on our list, is GC's pressed lithium disilicate. How the two compare is on our Lisi Press page under Read next.
  • The dentist's check-up, scan and any gum or tooth treatment needed first are listed separately.

Who suits E-max Press veneers?

General guidance only. Your dentist decides after seeing your teeth and bite.

Your situationIs E-max Press a usual choice?Why
Stained, chipped or uneven front teeth with healthy enamelYesThin pressed veneers bond well to enamel and have the longest records
Small gaps or worn edgesYesVeneers can lengthen and widen teeth a little
Very dark teeth, such as tetracycline stainsAskNeeds a more opaque ingot or more thickness, which can mean more trimming
You grind or clench heavilyAsk, and plan a night guardGrinding was linked with more veneer failures (Lempel 2026)
Little enamel left, or large fillingsOften a crown insteadA veneer needs enamel to bond to
Crooked teethAsk about braces or aligners firstVeneers on very crooked teeth need more trimming

What this means for a veneer trip from Australia

  • Veneers take one trip of about 7 to 8 days. The lab needs a few days to press and finish them between your first visit and the bonding.
  • You may wear temporary veneers for those days. Eat softer food and avoid biting hard things with your front teeth.
  • Choose the shade in daylight and look at the try-in before bonding. Once bonded, a veneer cannot be taken off to change the shade.
  • Ask for the product name (IPS e.max Press) and the shade code in writing. A dentist at home can then match a replacement.
  • If you grind, ask for a night guard before you fly home.

What to ask before you choose

  • Is it IPS e.max Press from Ivoclar, or another lithium disilicate?
  • How much enamel will you remove from each tooth?
  • Which translucency of ingot will the lab use for my tooth colour?
  • Can I see a mock-up or a try-in before the veneers are bonded?
  • How will you bond them: acid etch, silane and resin cement?
  • What does the 10 years lab warranty cover, and do I need a night guard to keep it?

Common beliefs that are not quite right

  • "E-max is not porcelain." It is a dental ceramic, which is what porcelain means in everyday speech.
  • "E-max veneers are fragile." Fractures were rare in the long studies: 1.45% of 413 veneers over up to 20 years (Aslan 2019).
  • "Veneers last forever." 87% were still in place at 20 years in the longest study. Long, but not for life.
  • "Veneers can be taken off with no harm." Standard veneers need a thin layer of enamel removed, which cannot be undone.
  • "The strongest material makes the longest-lasting veneer." Zirconia is stronger, but the bond to enamel and the fit decide how long a veneer lasts.
  • "A low price means a lesser material." Pressed lithium disilicate such as Emax Press is the material in several of the longest veneer studies.

How does The Hudson help?

The Hudson is not a clinic. We are a small team in Hanoi. We audit every clinic we work with and pick the one we trust most for each case. We show you every veneer material on the list with its warranty and price, ask the clinic how much enamel it will remove and how it bonds, and make sure the answers are written on your plan. You choose. Someone from our team comes to every appointment with you, including the shade choice and the try-in.

How we make money

You don't pay us anything. When you go ahead with treatment, the clinic pays us a referral fee for each patient. It doesn't change your price: you pay the clinic's normal price, the same as if you walked in yourself.

Quick answers

Are E-max veneers porcelain?

Yes, in everyday words. E-max is a lithium disilicate glass ceramic, a stronger kind of dental porcelain than the classic feldspathic one.

How strong are E-max veneers?

Ivoclar gives IPS e.max Press 400 MPa. Bonded to enamel, fractures were rare: 1.45% of 413 veneers over up to 20 years (Aslan 2019).

Are E-max veneers permanent?

They are long-lasting: 95% at 10 years and 87% at 20 in one study. The enamel removed cannot be put back, so they are not reversible.

What is the difference between E-max Press and E-max CAD?

Same family of material. Press is heated and pressed into a mould; CAD is milled from a block. Pressed veneers fitted better at the edges in a 2025 review.

How much are E-max veneers in Vietnam?

Emax Press veneers are A$328 per tooth at our partner clinics, with a 10 years lab warranty.

Wondering if E-max veneers suit your teeth?

Send us a photo of your smile. We ask the dentist at a partner clinic in Vietnam how many veneers you would need, how much enamel they would remove, and which material suits you. Free.

Send us a photo

Sources