Same-day (CEREC) crowns or lab-made crowns: which is better?
Neither is better for every tooth. A same-day crown, often called CEREC after the system most people have heard of, is scanned, designed and milled in the dental clinic in one visit, usually from a block of glass ceramic. A lab-made crown is designed from the same kind of scan but made by a dental technician over 1 to 3 days, with a wider choice of materials and more hand finishing for colour. Both last well in the studies: chairside glass-ceramic back-tooth crowns survived 83.5% at 10 years in one trial (Rauch 2018), and lab-made solid zirconia crowns 96.8% at 5 years in a 2026 review (Pjetursson 2026). The same-day route saves a second visit and the temporary crown. On a 7-day crown trip to Vietnam that saving is small, because the lab works while you are there. Our partner clinics use a lab, at A$222 to A$971 per tooth.
- Chairside glass-ceramic back-tooth crowns: 83.5% survival at 10 years (Rauch 2018, 41 crowns).
- Lab-made solid zirconia crowns: 96.8% survival at 5 years (Pjetursson 2026, review of 64 studies).
- Lab-made crowns at our partner clinics in Vietnam: A$222 to A$971 per tooth, fitted on the same 7-day trip.
Same-day or lab crowns at a glance
| Same-day (chairside) crown | Lab-made crown | |
|---|---|---|
| Where it is made | A milling machine in the dental clinic | A dental lab, by a technician |
| Visits | One, about a few hours | Two: shaping, then fitting 1 to 3 days later |
| Temporary crown | Not needed | Worn for 1 to 3 days |
| Usual materials | Glass ceramic (such as e.max CAD), feldspathic porcelain, resin ceramic; some zirconia | Solid or layered zirconia, glass ceramic, porcelain fused to metal, and more |
| Colour and detail | One block, stained and glazed in the clinic | Stained, glazed or layered by a technician, with more control over colour |
| Long-term results | 83.5% at 10 years for glass ceramic back teeth (Rauch 2018) | 96.8% at 5 years for solid zirconia (Pjetursson 2026) |
| Fit | Similar to pressed lab crowns in a lab test (Neves 2014) | Similar |
| Suits | One or two back teeth when you live near the clinic | Front teeth, many crowns, grinding, colour-critical cases |
Each row is explained below. CEREC is a brand name of one chairside system; other brands exist, and the studies below cover several.
How each kind is made
Both start the same way. The dentist shapes the tooth and takes a digital scan of it with a small camera. The difference is what happens to that scan.
Same-day (chairside) crown
- The dentist or an assistant designs the crown on a computer in the clinic, using the scan.
- A milling machine in the clinic carves the crown from a small solid block of ceramic.
- Glass-ceramic crowns are then stained, glazed and fired in a small oven to reach full strength and colour.
- The crown is tried in, adjusted and fixed in the same appointment.
Lab-made crown
- The scan goes to a dental lab, and the shaped tooth gets a temporary crown.
- A technician designs the crown on a computer, and it is milled, usually from zirconia or glass ceramic. Some are pressed from heated ceramic instead.
- Zirconia is baked for hours to reach full strength. The technician then colours the crown by hand, glazes it, and for some front teeth adds layers of porcelain.
- At a second visit, the temporary comes off and the crown is tried in, adjusted and fixed.
So the real choice is not digital against old-fashioned. Most lab crowns today are also designed and milled by computer. The difference is who finishes the crown, which materials and ovens are available, and how much time goes into colour.
Which materials each route can use
| Material | Same-day in the clinic | Lab | What it is like |
|---|---|---|---|
| Glass ceramic (lithium disilicate, such as e.max) | Yes, the usual choice | Yes | Translucent and natural-looking; strong enough for most single crowns |
| Feldspathic porcelain blocks | Yes | Rarely as solid blocks | Very natural colour; weaker, so it suits teeth that take less force |
| Resin ceramic (hybrid) blocks | Yes | Sometimes | Kind to opposite teeth; wears and stains more |
| Solid zirconia | Possible with a fast-sintering oven | Yes, the usual choice | Very strong; the common choice for back teeth and grinders |
| Layered zirconia (porcelain on a zirconia core) | No | Yes | Lifelike front teeth; the porcelain layer can chip |
| Porcelain fused to metal | No | Yes | The older standard; a dark line can show at the gum over time |
Fast sintering is what makes same-day zirconia possible. In a laboratory comparison, zirconia sintered in about 15 to 30 minutes had similar density, strength and ageing resistance to zirconia sintered over several hours, but one of the two fast-sintered materials came out noticeably less translucent (Cokic 2020). That is fine for a back tooth and less so for a front one.
At our partner clinics in Vietnam, crowns are made by a lab from a list of named zirconia and glass-ceramic brands, from A$222 to A$971 per tooth. For how those materials compare, see zirconia vs E-max crowns.
How long same-day crowns last
Chairside crowns have been studied for over 10 years. The results are good, and the studies are small.
| Study | Crowns | Result |
|---|---|---|
| Fasbinder 2010 | 62 glass-ceramic crowns | No fractures or chips at 2 years |
| Reich 2013 | 41 glass-ceramic back-tooth crowns | 96.3% failure-free at 4 years |
| Rauch 2018 (same group, 10 years) | 41 glass-ceramic back-tooth crowns | 83.5% survival, 71.0% with no problem at all; every problem was on a molar |
| Otto 2015 | 40 feldspathic porcelain back-tooth crowns | 95% survival on molars and 94.7% on premolars at up to 12 years |
In the 10-year study, the five failures were one crown fracture, one broken tooth under a crown, a nerve problem, a root fracture and decay under one crown. Only one of the five was the crown itself breaking; the rest were the tooth (Rauch 2018). That pattern is the same for lab crowns: most long-term problems are with the tooth underneath, not the crown.
How long lab crowns last
| Crown type | Still in place after 5 years |
|---|---|
| Solid zirconia | 96.8% |
| Layered zirconia | 97.3% |
| Porcelain fused to metal | 97.1% |
The two routes cannot be compared head to head from these numbers, because the studies differ in size, length, teeth and materials. No large trial has put chairside and lab crowns side by side over many years. What both sets of studies show is that a well-made crown of either kind usually lasts many years, and that the tooth, the gum and your cleaning decide more than where the crown was milled. For the longer view on zirconia, see how long do zirconia crowns last.
What can go wrong with either kind
| Problem | What the studies saw | What it means |
|---|---|---|
| The tooth under the crown breaks or needs a root canal | Most of the failures in the 10-year chairside study (Rauch 2018) | Not about the route; old fillings and cracks raise the risk |
| Decay at the crown edge | Two cases in the 4-year chairside study, not caused by a poor fit (Reich 2013) | Cleaning along the gum line matters with any crown |
| The crown breaks | One of 41 chairside crowns in 10 years (Rauch 2018) | Rare with modern solid materials |
| Porcelain chips off | More common on layered crowns than on solid ones (Pjetursson 2026) | A reason solid crowns are used on back teeth |
| The crown comes loose | One crown in the 10-year chairside study (Rauch 2018) | Usually recemented by any dentist |
Whichever route you choose, ask for the material, the lab or system and the cement in writing. If a crown ever needs a repair at home, your dentist works faster with those details.
Fit, shape and the look on front teeth
- Fit: in a laboratory test, glass-ceramic crowns milled with a CEREC system fitted the tooth edge about as closely as pressed lab crowns, both within about 40 micrometres; a second chairside system fitted less well (Neves 2014).
- Shape and bite: a study compared chairside crowns, lab-milled crowns and traditionally pressed crowns on the same molar. Chairside crowns were closest to the original tooth shape, lab-milled crowns had the most bite contacts, and the pressed crowns needed the least adjusting and scored highest for looks. All three were clinically acceptable (Kollmuss 2016).
- Colour: a chairside crown comes from one block, sometimes with built-in shade layers, and is stained and glazed by the clinic. A lab technician has more tools: hand-colouring, layering porcelain, and matching small marks and translucency to the teeth beside it.
For a back tooth, these differences rarely show. For a single front tooth next to your own natural teeth, the colour match is the hardest job in crown work, and that is where a lab's extra steps matter most. What makes a crown look natural is the shade, shape and finish, not the price or the route; see will crowns from Vietnam look fake.
Why a short dental trip does not need same-day crowns
The main gain of a same-day crown is one visit instead of two. That matters most when you are fitting a crown around work at home and would otherwise come back a week later. On a crown trip to Vietnam you are already there for the week, and the lab works in Vietnam, so the second visit costs you nothing extra.
- Day 1: check-up, scan, shade choice. The teeth are shaped and temporary crowns go on.
- Days 2 and 3: the lab makes the crowns. You are free.
- Day 3 or 4: fitting day. Each crown is tried in, adjusted and fixed.
- Days 5 and 6: you live with the new teeth; any small adjustment is made.
- Day 7: you fly home.
The days you would save with same-day crowns are the ones you need anyway, to test the bite at real meals before flying. For a full set of 16 to 20 crowns, a lab also makes the whole set together, matched in colour and shape, which is hard to do one block at a time in the chair. The full timetable is on how many days for crowns in Vietnam.
What each costs
At our partner clinics in Vietnam, lab-made crowns cost A$222 to A$971 per tooth, depending on the material, from The Hudson price list, November 2026. The price includes the scan, the temporary crowns while the lab works, the fitting and bite adjustments.
In Australia, the average fee for a crown at a general dentist was about A$1,250 to A$2,100 depending on the state, in the ADA's 2022 fee survey reported by Choice. We found no published survey that separates same-day from lab crown fees in Australia, so ask for both prices if your dentist offers both.
For the full price list by material, see how much do crowns cost in Vietnam.
Choice by situation
| Your situation | Usual choice | Why |
|---|---|---|
| One back tooth, near your own dentist, busy week | Same-day can suit | One visit, no temporary, good long-term results (Rauch 2018) |
| A single front tooth beside natural teeth | Lab | More control over colour and translucency |
| A full set of 16 to 20 crowns | Lab | The set is made and colour-matched together |
| You grind your teeth | Lab, solid zirconia | Highest strength; ask about a night guard |
| A crown on a dental trip to Vietnam | Lab | The lab works while you are there; the week is needed for checks anyway |
| Replacing an old crown on a molar under heavy load | Either, in a strong material | All the problems in the 10-year chairside study were on molars (Rauch 2018) |
Questions to ask the dentist
- Is this crown made in the clinic or in a lab, and which material is it?
- Why that material for this tooth?
- Who does the colouring, and will I see the crown before it is fixed?
- If it is a front tooth, can the technician see a photo of my teeth or my shade in person?
- How many days until the final crown, and will I have a temporary?
- Is the price the same either way?
Common beliefs that are not quite right
- "Same-day crowns are digital and lab crowns are not." Most lab crowns are designed and milled by computer too.
- "Same-day crowns are weaker." Chairside glass-ceramic crowns did well over 10 years in a trial (Rauch 2018). The material matters more than where it is milled.
- "Lab crowns always look more natural." A lab has more tools for colour, which matters most on front teeth. On back teeth, the difference rarely shows.
- "A crown trip abroad is quicker with same-day crowns." You still need days after fitting to check the bite, so the trip length barely changes.
- "No temporary means no sensitivity." Shaping the tooth causes the sensitivity; it can happen with either route.
Where the evidence is thin
The long chairside studies follow small groups, around 40 crowns each, at single centres. The large reviews of lab crowns pool thousands of crowns but rarely say how each was made. A long head-to-head trial of chairside against lab crowns in the same kind of patient does not exist yet.
How we make money
You don't pay us anything. When you go ahead with treatment, the clinic pays us a referral fee for each patient. It doesn't change your price: you pay the clinic's normal price, the same as if you walked in yourself.
Quick answers
What is a CEREC crown?
A crown scanned, designed and milled in the dental clinic in one visit. CEREC is the brand name of one chairside system.
Do same-day crowns last as long as lab crowns?
Both do well. Chairside glass-ceramic back-tooth crowns survived 83.5% at 10 years in one trial (Rauch 2018); no long trial compares the two directly.
Are same-day crowns good for front teeth?
They can be, but a lab has more tools for matching colour and translucency, which matters most on a single front tooth.
Do your partner clinics in Vietnam make same-day crowns?
They send crowns to a lab in Vietnam, which takes 1 to 3 days, so the crowns are fitted on the same 7-day trip.
Are same-day crowns more expensive?
In Australia it varies by clinic; we found no survey separating the two. At our partner clinics in Vietnam, lab crowns are priced per tooth by material.
Weighing up crowns at home and in Vietnam?
Send us your crown quote from home. We will compare it line by line with a written price from our partner clinic in Vietnam, material by material. Free.
Compare my quoteSources
- Vietnam prices: The Hudson price list, November 2026 (partner clinics in Vietnam).
- Choice: Dental fees, ADA Dental Fees Survey 2022 (crown item 615, by state).
- Rauch A et al. Clinical survival of chair-side generated monolithic lithium disilicate crowns: 10-year results. Clin Oral Investig, 2018.
- Reich S, Schierz O. Chair-side generated posterior lithium disilicate crowns after 4 years. Clin Oral Investig, 2013.
- Otto T, Mörmann WH. Clinical performance of chairside CAD/CAM feldspathic ceramic posterior shoulder crowns and endocrowns up to 12 years. Int J Comput Dent, 2015.
- Fasbinder DJ et al. A clinical evaluation of chairside lithium disilicate CAD/CAM crowns: a two-year report. J Am Dent Assoc, 2010.
- Pjetursson BE et al. Survival, failure and complication rates of metal-ceramic, veneered and monolithic all-ceramic tooth-supported single crowns, part 1. Int J Prosthodont, 2026.
- Neves FD et al. Micro-computed tomography evaluation of marginal fit of lithium disilicate crowns fabricated by using chairside CAD/CAM systems or the heat-pressing technique. J Prosthet Dent, 2014.
- Kollmuss M et al. Comparison of chairside and laboratory CAD/CAM to conventional produced all-ceramic crowns regarding morphology, occlusion, and aesthetics. Clin Oral Investig, 2016.
- Cokic SM et al. Mechanical properties, aging stability and translucency of speed-sintered zirconia for chairside restorations. Dent Mater, 2020.